Can I use UV-vis detector to detect dopamine in HPLC? What is the wavelength recommended?

Is There Any Feasible Method To Test Fluorescent Compounds Other Than Fluorescence Spectrometers ??

Is There Any Feasible Method To Test The Efficiency Of Fluorescent Compounds Other Than UV Spectrometers ? Suggestions Would Be Appreciated !

02 March 2021 5,785 3 View

Any research papers for extraction of nutrient deprivation on macroalgae? Analysed by HPLC-UV and GC/MS. Possibly from macroalgae genus Rhizoclonium?

I am doing my thesis on the nutrient deprivation on the macroalgae Rhizoclonium sp. I will be analysing the levels over a period of roughly 5 days by HPLC-UV and GC/MS. I will be using seawater as...

28 February 2021 6,477 1 View

Why initial concentration of Pb not the same as calculated one when testing using AAS?

I am currently doing research on the adsorption of heavy metal using magnetic reduce graphene oxide. I use AAS to determine the concentration of the heavy metal. I prepare the Pb solution with...

26 February 2021 9,580 4 View

Is this the write procedure for acid digestion of soil for heavy metal analysis using AAS?

How to do acid digestion of soil sample with 3:1 aquaregia in an open vessel?

23 February 2021 3,053 7 View

How can I simulate the optical absorption spectrum of a biomaterial (like DNA or protein) in COMSOL?

I need to simulate the optical properties of a biomaterial, namely DNA, in COMSOL. Basically I need to simulate the IR absorption spectrum of a cylinder filled with a 'concentration' of DNA. I am...

21 February 2021 3,043 3 View

In methylene blue test Why is UV absorbance reading very low as soon adsorbent is added and then increasing before reaching equilibrium?

Hello, I'm working on removal of methylene blue. 01. in the dark test very first reading is taken 15 minutes after adding adsorbent to the dye solution and that UV absorbance reading is very...

19 February 2021 472 5 View

Unusually Busy Raman Background?

Hello, I am observing a nearly periodic background spectrum for a wide variety of SERS substrates. I see this response (attached below) for bare Au films, Cu films, and Au nanoparticles on...

15 February 2021 9,922 5 View

How to determine the drug loading and the drug release capacity of a polymer micelle using UV spectroscopy?

Currently, I am working on PLA-PEG copolymer micelle for the drug delivery system. I have seen several papers where some researcher talks to centrifuge the drug-loaded micelle to separate the...

13 February 2021 5,822 7 View

Reaction condition to convert NH2 to COOH?

I need to couple Dopamine by NH2 end to silica nanoparticles coated by PEG-NH2, but first i need to convert the PEG-NH2 to COOH by using succinic anhydrous ... can you suggest a reaction condition ?

13 February 2021 2,768 4 View

What is the UV-vis spectroscopy and HPLC UV detector?

I did spectrum scan to levothyroxine sodium which show highest absorption at wave length=230nm which the absorption =0.136 and it's absorption at 225nm =0.047 but when Injecting it on HPLC...

09 February 2021 1,631 3 View

Kateryna Lystvan

yes, you can use this detector. The recommended wavelength - 272 nm

Naeem Ur Rehman

can you please tell me the mobile phase for dopamine

Dear Naeem Ur Rehman , I use 1% aqueous formic acid with 3-7% of acetonitrile

Dear Kateryna Lystvan can you please share the publication as i am facing problem in ecd now swithing towards uv..but couldnt find any good paper..