A
laser glass material
CTS and CZTS materials are very promising for low-cost and nontoxic photovoltaics. These materials can be deposited by different techniques, in particular, by the electrodeposition method.
Hi all, I proceed with nucleic acid gel electrophoresis recently several times, but a wried phenomenon is they always melted after running over 30min. My gel concentration is 1% percentage...
22 February 2021 9,896 3 View
Initially we are getting positive amplification .The positive colonies are selected and restreaked.The PCR is not showing positive amplification.
18 December 2020 9,802 3 View
28 July 2020 2,413 2 View
1. How to scale up the expression of fusion proteins? 2. How to improve the purity of fusion protein to 90%? I have tried affinity chromatography, but the purity by SDS-PAGE was not satisfied....
04 November 2019 8,479 6 View
"The active area of so porous electrode as the authors used could not be correctly evaluated using the Randles-SEVCIK formula. Just because the depletion layers of active places may overlap." How...
28 October 2019 1,782 3 View
please share your idea regarding the future of bioinformatic analysis in plant science? recommend the preferred PC and MAC programs for the beginner ,and for the advanced users? as well as any...
24 October 2019 8,814 4 View
Can anyone help me to calculate Raman cross section in RE doped glasses?
12 December 2018 6,330 1 View
I want to isolate the cells from the tumors (mouse model and human). I read that Collagenase I is harsher than Collagenase IV. Can anyone please suggest if there is any commercial kit with the...
08 August 2018 4,961 2 View
Hoechst 33258 stain
15 May 2018 3,128 3 View
i have obtained an additional peak in XRD at 31.7 degree. so i want to get the idea about this peak few articles mentioned it but not showing angle values.
29 November 2017 3,772 3 View
Hi all, I am validating a polyclonal antibody raised against human ANT4, through WB and ICC. In most of my controls, the antibody shows very little off-target binding, but when I pre-incubate the...
03 March 2021 5,999 3 View
We use reactive sputtering process to make aluminum nitride film, and want to make c-axis aluminum nitride film on a silicon substrate, but the crystal orientation cannot be seen with...
03 March 2021 7,975 3 View
Hi, Could you help me to get the latest (2019, 2020) solar resource data for a particular site in JAPAN? PV GIS and NSRDB data are not in reach to JAPAN, I'm looking for some other database for...
03 March 2021 961 3 View
Hello, I have a mechanism where air rises due to convective flows. In this simulation, nothing is driving the air except this. I understand that the Boussinesq approximation only works for small...
02 March 2021 4,910 3 View
I need to prepare a solution of Napabucasin (inhibitor of cancer cell stemness) in dichloromethane. The drug is expensive, so maybe somebody already tried to do it. If it is soluble, what is the...
02 March 2021 9,945 3 View
im working now on TPV solar cells and metamaterials and i realy need our help in CST microwave i have a tpv cell simulation and i want to extract particullarly the absorbtion of only the active...
02 March 2021 2,246 2 View
In some materials, properties such as band gap, thermal conductivity differ along different crystallographic axes. What are the basics?
01 March 2021 1,923 3 View
I am thinking about working on solar furnace with heliostats that concentrate sunlight and heat molten salt, but currently no luck with research. Not a lot of papers based on the subject. (check...
01 March 2021 5,023 5 View
I try to check the uv-vis absorption of Indium nanoparticle. Now I am measuring in solution, can I measure it in the form of a film?
01 March 2021 930 3 View
I am designing a small grid connected solar PV power-plant. As the battery's capacity is specified in Ah and demand in kWh. What is the best way to size the battery bank? I have battery price in...
28 February 2021 1,638 3 View