I require RFID simulator for running an authentication protocol, so if anyone could suggest a good RFID simulator for the same.
You could use OMNET++ and if required you can interface it with other libraries and simulation packages (MATLAB, etc.)
Check this thesis report: http://kth.diva-portal.org/smash/get/diva2:613266/FULLTEXT01.pdf
Good luck !
I suggest you to use a specialized similator that is designed for RFID rather then using OMNET or NS2
Well you can use: RFIDSIM
http://www.matthewjmiller.net/files/rfidsim_doc/html/
or RFID‐Env
http://www.emeraldinsight.com/doi/abs/10.1108/14637151011093044
Regards.
Using EM simulation tools.will ensure that the tag will work not only on its own,
but also in its intended environment,
Using also “Turck BL ident” simulator : It is an interactive simulator for RFID contains of several levels that has a whole range of combination possibilities of data carries and read-write tags as well as interfaces for integration into field bus systems.
The main characteristics of this simulator are:
- “The degree of protection” : The integration into field bus system with the suitable TURK interface modules that are available in degree of protection IP20 and IP67.
- The service life: it results from the possible number or read-write operation on the data memory.
- Transmission frequency: This simulator operates with 13.56 MHz transmission frequency between data memories and read-write devices.
- it has other characteristics like size , memory capacity and read/write time.
Its advantages are : Future-proof investment , maximum flexibility , Efficient production(that the RFID from this simulator can guarantee short changeover times to keep up with the required cycle time) , fast implementation and automatic data collections
See this website to use the simulator:
http://pdb.turck.de/en/DE/rfid/simulator
Can anyone help me to get a simulator for electronic passport or NFC simulator working on 13.56MHz without need to hardware ?
- Badges
- Science topic