Can anyone provide me digsilent or matlab simulated file of ieee 16 machin-68 bus system?

01 January 1970 1 4K Report

due to the lack of time, I'm looking for simulated file of ieee 16 machine -68 bus standard system in matlab or digsilent .can anyone help?

Saran Satsangi

If you have system data, use MATPOWER to simulate the same. Its already having lot of IEEE test system. Just google it, download, and simulate. Its free of cost.

Badges
Science topic

More Saber Ghashghaei's questions See All

Any one knows about dc side filters of HVDC system connected to different frequency AC systems?

hi guys i appriciate to let me know about DC side filter of a HVDC transmition line connected to a 50HZ AC system from one side (e.g. rectifire side) and to a 60HZ AC system from the other...

02 March 2018 1,989 1 View

Practical question about earth system for HVDC CSC system?

hi guys i have a practical question i wanted to know if a same earth well connection is used for DC filters and converters in converter station???? or the use seprated ground connections?(one...

31 December 2017 7,099 6 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

fatal error

16 June 2021 0 0 View

fatal error

16 June 2021 0 0 View

fatal error

16 June 2021 0 0 View

Arena simulation - how do i model the following model in ARENA (see description) (new to ARENA)?

Hello, I'm fairly new to ARENA and I have the following problem: I have two queues in which, in each queue, a different order type arrives (both having an arrival rate of exponential 10). Order...

02 March 2021 2,431 3 View

Why are the velocities so high in my Boussinesq approximation Fluent simulation?

Hello, I have a mechanism where air rises due to convective flows. In this simulation, nothing is driving the air except this. I understand that the Boussinesq approximation only works for small...

02 March 2021 4,910 3 View

Which is the most convenient manufacturing software for Additive Manufacturing?

Which tools can be used to generate machine codes for additive manufacturing?

02 March 2021 7,220 2 View

Why the results when using wall thickness and when using shell conduction are different in ansys fluent?

Actually, I am running cfd simulation for a heat exchanger which has two fluids one hot and other one is cold fluid. there is a solid domain between them, which I removed and instead I have used...

01 March 2021 9,537 2 View

How can I integrate a routing protocol in a tiny device (e.g. Raspberry Pi)?

Hi Community, I'm facing the issue of integration/compiling a new routing protocol in a WSN simulator. The final goal is to successfully add, configure this routing protocol in hardware devices...

01 March 2021 9,332 6 View

Joint behaviour in Abaqus is not captured well?

I am working on roof joint and trying to simulate the behaviour in Abaqus. I am successful in running the model but the final graph does not follow the experimental curve in the negative direction...

01 March 2021 6,661 3 View