Can anyone give me information(or article) about the scavenger of radicals by nanosilica in nanocomposites?

More Mahmood Sanei's questions See All

How can I prepare a simple Electro-responsive hydrogel?

10 November 2013 8,905 8 View

What kind of anti-algae additives for polyolefins (PP, PE) would you recommend?

I want to use them in water tanks.

09 October 2013 1,592 2 View

What is the best method for synthesizing polyacrylonitrile?

Bulk, solution, or dispersion. Please help me and introduce your references.

09 October 2013 6,490 4 View

Do ether bonds degrade with phosphoric acid up to 4%wt at 140 or 160 centigrade?

PEG polymers

05 June 2013 711 1 View

Can I report nanoscratch test information (by nanoindentation tool) without AFM images?

AFM: atomic force microscopy,

01 February 2013 2,202 6 View

What is the best way to get silica surface modification efficiency with silane modifiers?

silica nanoparticles: aerosil 200, silane modifiers: APTES

31 December 2012 5,517 2 View

Why the glass transition temperature decreases with increasing nanoparticle in polymeric system?

General question, please introduce your references

31 December 2012 9,903 14 View

What does controlled particle size in inverse suspension mean?

Micrometer

11 December 2012 2,885 0 View

What is the structure of plant oils extracted from algae?

Introduce related articles

11 December 2012 1,349 0 View

What are the foul-release coatings?

Which chemicals are commonly used for this application?

11 December 2012 1,662 3 View

Please introduce me the latest published articles on the structure and properties of metal nanocomposites?

26 July 2024 2,200 3 View

After regeneration studies of the PVDF membrane, will the permeate flux and TDS removal efficiency increase or decrease?

Regeneration Studies for the PVDF membrane and PVDF/CuO nanocomposite membrane were carried out by chemical cleaning.

07 July 2024 7,033 0 View

What does the disappearance of the XRD peak near 8 degrees, corresponding to the (002) plane of MXene, imply in a MXene-based nanocomposite?

I am trying to synthesize Mxene based nanocomposites. Interestingly, the characteritic peak dissapears which indicates the disruption in interlayer spacing of MXene. So, what might be other...

03 July 2024 5,702 3 View

How do we measure the electrical conductivity of this magnetic nanocomposite?

A magnetic nanocomposite has been synthesized and its electrical conductivity needs to be measured. What analysis and technique can be used to measure the electrical conductivity of this magnetic...

16 June 2024 7,488 3 View

Which adsorbent dose should be selected for batch adsorption studies?

I am carrying out batch adsorption studies for the removal chromium and lead. I performed an experiment with different adsorption doses 0.01, 0.05 and 0.1 g. The highest % removal was achieved at...

27 May 2024 8,647 8 View

How can I avoid interaction of plant based reducing agents to final nanocomposite for in situ preparation og Ag doped GO-Fe3O4 nanocomposite?

Can anyone comment on the following concerns I want to synthesize Ag doped GO-Fe3O4 nanocomposite in situ using plant extract as green method for Ag+ reduction. What will be the effect of plant...

23 May 2024 5,244 2 View

Elastic properties of matrix reinforced with nanofillers?

How can I find the Elastic properties of matrix material reinforced with nanofillers, is there any relation or formula to find it?

20 May 2024 5,653 1 View

Hello, I need to ensure that my calculation for the amount of ZnO-TiO2 nanocomposite is right or is there a mistake, or there is another way?

I fabricated nanocomposite using the sol-gel method with a mole ratio (1:1) I want (10g) of the final product ZnO-TiO2( molar mass-161.246g/mol) the calculations of the raw materials are as...

13 May 2024 1,731 5 View

What is the relationship between % elongation and modulus of elasticity?

Hi I have done the mechanical testing of my material. I got three results % elongation, ultimate tensile strength and modulus of elasticity represented in MPa. I observed that if % elongation of...

12 May 2024 4,592 3 View

Why intensity of XRD peaks corresponding to the filler increases with increase in filler loading?

What is the mechanism behind increase in the peak intensity with filler loading in polymer nanocomposite. In my work, the (014) peak corresponding to the filler increased proportionately with...

08 May 2024 7,972 3 View

Furqan Ali Shah

Hey Mahmood,

I wonder if this paper might be useful for you:

Xiaowei Gao, Guangjun Hu, Zhongzhong Qian, Yanfen Ding, Shimin Zhang, Dujin Wang, Mingshu Yang, Immobilization of antioxidant on nanosilica and the antioxidative behavior in low density polyethylene, Polymer, Volume 48, Issue 25, 30 November 2007, Pages 7309-7315

Best regards

Mahmood Sanei

Thanks Mr. Furqan Shah