Can anyone explain the mechanism of corrosion process under high temperature in acidic solution?

10 October 2017 0 9K Report

There are more articles which illustrated the effect of temperature at maximum 328K.

Thanks in advance for your cooperation,

Badges
Science topic

More Qhatan Adnan Yousif's questions See All

What's new about corrosion inhibition by using the nanotechnology?

Today, nanotechnology techniques have been used extensively in all fields of science. What are the modern applications in the corrosion process? Regards,

10 November 2017 10,119 0 View

What is the difference between the graphene nanoparticles and graphene nanoplate ?

Any of which could be better used to fabricate of dye sensitized solar cells and Why? please, attached some articles. Best Regards,

10 November 2017 8,945 1 View

How can I get the best EIS curves?

I am working to measure the EIS for the dye sensitized solar cell , but I can't get a smooth curve for the Nyquist and Bode figures. What are the reasons and how I can avoid this...

10 November 2017 2,753 0 View

Do you think the distance learning method is successful or not?

I think this method for learning it is not effective, especially in science fields that need the laboratory requirements. Regards,

10 November 2017 4,275 1 View

Can anyone tell me how I can check the full optimization parameters of dye sensitized a solar cell?

It is necessary to know the methods which used to check the full parameters for the solar cell. Regards,

10 November 2017 4,334 0 View

How to write the scientific papers in a good style?

In many cases, the scientific article is rejected, although the work is good. Does the writing method and language have a role. Regards,

10 November 2017 3,862 18 View

What are the best scientific websites to check the original of research?

Need to know the best GLOBAL WEBSITES to evaluate the quality of the scientific article? Statement of name and address of it. Best regards,

10 November 2017 6,210 16 View

What is the best method to estimate the thickness coating on the glass substrate?

I am working to study the dye sensitized solar cell and I hope to find the thickness of the coating layer on the ITO glass. Thanks in advance for your reply

09 October 2017 9,326 3 View

What are the factors that effect on the open circuit potential (ocp) and essential for estimating the Impedance Resistance ?

I read more researches about my question, there are more researcher not care to measure the OCP. Regards,

09 October 2017 7,423 0 View

What are the most important reasons that prevent the university student from expressing his opinion of the lecture?

I mean the student's opinion in the scientific subject, although it is not understood. Statement of reasons and solutions. Thanks in advance for your cooperation

09 October 2017 3,932 0 View

Can you connect an HPLC to a Mass Spec only at a certain time point?

Can anyone explain this method? Especially the last statement where it says only at 1.5 to 2.5mins was the MS/MS connected to the UPLC. How is that possible, is it a feature in this specific...

11 August 2024 8,141 3 View

Separation of organic acids-HPLC?

Hello What should be done to separate and identify organic acids in HPC when their RetTime is the same?Like oxalic acid with Propanoic Acid.or acids that have a very close RetTime.

07 August 2024 8,782 3 View

RNA later for the preservation of RNA in fecal samples at room temperature for one day (37°C)?

I am planning to collect human fecal samples for metatranscriptomic analysis using MGI. These samples are from indigenous people living in a region with high temperatures. I will have access to a...

06 August 2024 1,367 3 View

How to understand this crystallographic phenomenon of low temperature crystals in zeolite?

During low-temperature testing, new diffraction peaks that appear could be indicative of several phenomena. In one of our tests, we observed notable new peaks around 40° and 45° in a specific...

06 August 2024 726 3 View

Determining the worth of a point improvement in Hamilton Depression Scale?

Dear readers, Thanks for your attention. I am wondering about the health economic problem of quantifying the value of interventions which a) prevent, b) improve symptom profile and c) ultimately...

05 August 2024 3,246 1 View

Is it possible to improve the reforming section of the Haber-Bosch process without using air separation units?

A typical reforming section in a large-scale Haber-Bosch process (Figure 1) comprises two reactors. A mixture of methane (CH4) and steam (H2O) is fed into a primary reformer to produce syngas via...

01 August 2024 7,051 5 View

Conjugation of PEG-Amine to an Amino Acid Using EDC?

I am attempting to conjugate PEG to an amino acid at the C-terminus, for the purposes of producing nanoparticles. I have been told that PEG modified with amine groups can be used for this purpose,...

31 July 2024 2,033 1 View

How to improve peaks separation in HPLC?

Hi everyone, I'd like to better separate two close peaks coming from a bioconversion sample, I'm currently using a C18 KromaPhase 4,6mm Ø.I. SCHARLAU, particle size (µm): 10, pore size (Å): 100,...

30 July 2024 435 3 View

Is it possible to use a safer acid instead of monochloroacetic acid to convert bacterial cellulose to carboxymethyl cellulose?

Hi, researchers, Is it possible to use a safer acid instead of monochloroacetic acid to convert bacterial cellulose to carboxymethyl cellulose?

29 July 2024 4,570 0 View

How to use Desmond in HPC ?

Our department has recently acquired an HPC (High-Performance Computing) system, and I'm thrilled to take my molecular dynamics calculations to the next level using Desmond. I used to run my...

28 July 2024 6,553 1 View