Moving boundary is used to depict the state of liquid and solid region in any melting-solidification problem. I'm using C.F.D.
I need some empirical formula from which I want to generate the trends in thermal conductivity wrt temp using matlab/excel.
05 June 2014 7,365 0 View
We need to add recoil pressure at the moment of phase change, as in, activate the recoil pressure when the fluid starts vapourizing. Any suggestions?
11 December 2013 8,115 1 View
FEM or CFD ? also in CFD, which discretization method to use, TSE or IOCV?
07 August 2013 1,712 3 View
i am unable to interpret why its increases in start as shown in figure
11 August 2024 2,179 1 View
I am using Rhodamine6G as gain medium and silver nanoparticles as scatterers on a microscope slide and laser input 532 nm comes from above.
09 August 2024 9,894 2 View
I would like to understand potential safety concerns while handling SEB in the lab. Especially while working in animal house facility. Would like to know precautions for handling. Sigma MSDS...
07 August 2024 6,034 3 View
During low-temperature testing, new diffraction peaks that appear could be indicative of several phenomena. In one of our tests, we observed notable new peaks around 40° and 45° in a specific...
06 August 2024 726 3 View
I am interested to know the behavior of dyes toward light. Specifically, Blue dyes re-emit the spectrum, especially from the green zone (known as principal in LED lamps, and blue dyes are known...
05 August 2024 3,290 1 View
I am new to Micromechanics and having similar problem with understanding the implementation of the formula's. I would appreciate if anyone can guide me on how to go about getting a scalar value...
30 July 2024 969 0 View
Some Staphylococcus aureus strains Inhibit the growth of Mycobacteria in Mueller Hinton Agar medium containing 10% OADC. Do some Staphylococcus aureus strains have in vitro antimycobacterial activity?
29 July 2024 10,023 2 View
Please, what is the memory consumption of the Matlab function quad tree decomposition procedure [S = qtdecomp(I)] with respect to the input set I?
27 July 2024 5,455 2 View
There are three operating parameters - the laser power, the diameter of the focus spot and the scanning speed. It is necessary to obtain a seam of a given depth without pores. What parameter...
27 July 2024 7,168 2 View
all math can be traversed by code? all math can be translate to code?
26 July 2024 9,530 0 View