BET isotherm model for a multi-component aqueous system?

More Tejaswini Eregowda's questions See All

How to calculate Numerical substructure stiffness in hybrid Fire Simulation?

I am currently working on a hybrid fire simulation project and I am encountering difficulties in calculating the stiffness of the numerical substructure. Could someone kindly provide an...

05 May 2024 7,187 0 View

Where can i find the values of yield stress-plastic strain of steel in different temperatures ?

I need the relationship equations of yield stress and plastic strain for the input of abaqus. as i'm working on thermo mechanical response of steel structure.

25 February 2024 7,147 1 View

I got error in abaqus as WarnNodeBCIncorrectDof?

I found the node of error from result tree. At that node i haven't specifically applied any constraint and it is at the intersection of beam and column

23 November 2023 9,661 1 View

I'm unable to import .inp file in abaqus?

I have tried to import .inp through file>import and job>input file, but in neither cases I'm able to run the analysis and get the results

24 October 2023 8,125 2 View

How to check the specificity of the primers I designed for infusion cloning?

I have already designed primers according to the parameters but how do I check where my primers go and bind as in graphical view

12 December 2022 2,550 3 View

How do i change the pH of my medium to acidic( pH 6-7)?

How do I change the pH of my medium to incubate epithelial cell in an acidic environment (in the range pH 6-7) for 24-48 hrs to check the functionality?

22 March 2021 6,957 1 View

Please help me ,how to dissolve Ge Te bulk material for spin coating ?

solution processed technique for fabrication of thin films. which Solvent is suited for Ge Te based bulk

04 July 2020 5,562 0 View

How does the thermal conductivity change when organic acid is added to water?

Malic acid is added to water.

04 June 2017 3,630 3 View

Should we use RT primer when we are using Universal primers in RT-PCR?

I am doing RT-PCR for viroid detection using universal primers. In the initial RNA denaturation step, RT-Primer should be used before first strand cDNA synthesis in 2 step RT-PCR. I have not come...

11 November 2014 3,655 2 View

What are the methods used to estimate fat uptake in deep fried foods? Which is the best method?

I'm following the method of applying fat uptake percentage on the weight that is subjected to fry. Considering that the ingredients exposed to hot oil can absorb fat and the other ingredients are...

10 July 2013 3,123 1 View

In the presence of VERY high concentration (1000 ppm) of silicon, the adsorption isotherms of arsenic are showing anomalous trends, why so?

I conducted an adsorption experiment of arsenic on soil in the presence of different doses of silicon as competing ions to see the effect of silicon on arsenic adsorption and desorption. I took 5...

03 August 2024 6,500 3 View

How to know the b axis of a single crystal?

How to apply magnetic field parallel to b axis of any crystal

29 July 2024 4,083 2 View

MAGeCK Plotting Error: Logarithmic Axis Must Have Positive Limits?

I have been running a MAGeCK test command on the terminal for a CRISPR screen to rank sgRNAs and genes based on the read count tables. However, I get only the plot of the top-ranked genes...

28 July 2024 9,811 1 View

Why specific capacitance is not proportional with the specific surface area?

Dear researchers, Why specific capacitance is not proportional to the specific surface area? I have material A with a surface area higher than material B, but material B is showing little bit...

26 July 2024 9,156 2 View

How can I define Planetary motion in ABAQUS CAE, how define motion of three rollers around a central axis and passive rotation about their own axis?

16 July 2024 4,145 1 View

What is the degassing temperature and time for biochar for BET surface area analysis if TGA is not possible?

Since BET and TGA both are very costly instruments and many places the facilities are not available (for large number of samples) hence a threshold degassing temperature and time is preferable

16 July 2024 8,112 2 View

I came across oscillations in a pressure profile for a pipeline flow along the axis of a cylinder, how do I prove that these are not numerical err?

In terms of CFD, we often analyze the stability of the error using Von-Neumann analysis, especially for FDM based problems. Should we follow the same approach for a compressible fluid flow using FVM ?

13 July 2024 6,296 5 View

Determine pore diameter by BJH of TiO2?

Dear all, l need to help me to determine pore diameter. I got from BJH data the rp(peak area), Desorption Isotherm was 1.6 nm, but from Isotherm l got type lV with hysteresis H2 loop. Can l used...

10 July 2024 2,872 1 View

Why does a nitrogen adsorption-desorption isotherm form two loops?

BET analysis

27 June 2024 6,964 1 View

What does a decreasing 𝐶𝑒 vs. 𝑄e plot indicate in an adsorption isotherm?

I am conducting adsorption experiments in a liquid medium, and one of my samples showed a decrease in Qe values with an increase in Ce. Has anyone encountered this behavior before? What does it...

26 June 2024 7,304 2 View