Because in dry gas deposits (99% methane) there is a presence of oily layers?

04 April 2018 1 3K Report

Oil production.

The effect of the condensation contributes the oil layer in the dry gas deposits because it is not 100% metal, the fraction can condense and contribute oily substances to certain conditions of pressure and temperature.

Badges
Science topic

More Jairo Rondón's questions See All

What are the methods for dislodging liquids in oil wells that decline their production?

Oil and gas production operations

03 April 2018 3,006 2 View

What is the best method to validate a Stiff diagram?

Analytical chemistry

03 April 2018 8,515 2 View

Why the Swabbing technique is used in oil production operations?

Oil and gas production operations

03 April 2018 3,275 2 View

In the Stiff method because there must be an ion balance?

Analytical chemistry

03 April 2018 4,593 2 View

How does water influence the production behavior of non-associated gas wells?

Oil production.

03 April 2018 8,082 4 View

How can I identify the mechanism of damage to non-associated gas well training?

Oil and gas production

03 April 2018 1,187 3 View

How can I remove the water vapor from a natural gas directly into the well? Where do I get a field procedure?

Oil production.

03 April 2018 8,976 4 View

What is the optimal philosophy for the production of non-associated gas wells?

Oil production

03 April 2018 6,106 4 View

As it affects the total salinity of the water, the production behavior in gas wells?

Analytical chemistry

03 April 2018 9,197 4 View

What is the most effective method for reducing dew point in hydrocarbons?

Gas and oil.

02 March 2018 671 2 View

Any research papers for extraction of nutrient deprivation on macroalgae? Analysed by HPLC-UV and GC/MS. Possibly from macroalgae genus Rhizoclonium?

I am doing my thesis on the nutrient deprivation on the macroalgae Rhizoclonium sp. I will be analysing the levels over a period of roughly 5 days by HPLC-UV and GC/MS. I will be using seawater as...

28 February 2021 6,477 1 View

Necessary tube lenght to cool Natural gas in a dry-ice cooling bath?

I have a tank which contains natural gas at 250 Bar and 293 Kelvin. I want to cool the gas in a dry-ice cooling bath to about 195 Kelvin. The gas will flow in a copper-tube through the bath with a...

27 February 2021 8,128 1 View

How the wettability of rock sample can be changed by ageing in pure hydrocarbon oils only?

I want to do wettability analysis of hydrocarbon oil (octane)/rock/surfactant solution system. but to do the analysis first I have to make rock surface oil-wet. Since hydrocarbon oil does not have...

27 February 2021 5,383 3 View

Exit velocity of natural gas from pressurized tank?

Hi Guys. I'm a mechanical engineer and have a bit trouble, would be very glad if you could help me with my questions. I have a pressurized tank which contains Natural Gas at 200 Bar and 293...

26 February 2021 6,253 3 View

Gas sensor response and recovery time independant of flow rate and chamber volume?

I am trying to obtain the response and recovery times for my gas sensor device. It appears the the response/recovery times are primarily dependant on the flow rate of the gas I inject into the...

26 February 2021 1,511 3 View

Why do a weight decrease for thermal degradation in nitrogen gas condition?

Hi all The question is related to TGA(Thermogravimetric analysis). Thermal degradation easily understood but why do samples weight decrease? altough just binding is broked, the weight of...

26 February 2021 1,100 5 View

Is IMPACT FACTOR justified in case of Taxonomy?

There is huge pressure of getting good impact factor on scholars now a days. On the other hand Taxonomy is a very dry subject and the concerned papers can only get citation in same group of organism.

26 February 2021 5,851 1 View

Why do the air flow results vary totally when adding scalar in CFD ?

Dear All, We are using Autodesk cfd to calculate the air flow in a single sided naturally ventilated room, where air flow depends only on buoyancy due to temperature difference between inside and...

25 February 2021 9,602 4 View

What is the suitable range of Sulfur content and Viscosity of Heavy fluid Oil that used in Kiln?

What is the disadvantages of high sulfur content to the ceramic burning process? and what is the effect of outranged viscosity?

24 February 2021 8,219 2 View

Uncertianiny in using dry or wet basis in mixing a sediment with fuel oil?

Hello I'm currently working on a topic related to studying the anaerobic biodegradation of TPH in marine sediments. In this work, sediment should be mixed with fuel oil to a concentration of 20 g...

24 February 2021 9,839 3 View