As cast HEA with large grains?

More Adam Vida's questions See All

Good sites to recruit survey participants on a grad school student budget?

Any good recommendations for participant recruitment for online surveys on a grad school student budget?

02 March 2021 4,293 4 View

What is the stability of 2 3-dihydroxyquinoxaline in acidic water?

I'm developing a UHPLC assay, and the fluorescent product is 2,3-dihydroxyquinoxaline. The reaction to produce this requires hydrochloric acid (about 1.2 M). Will storage in this acidic...

20 February 2021 5,820 4 View

What is the best way to improve the working potential window of a solid electrolyte?

My solid polymer electrolyte shows low bulk resistance show quite a low bulk resistance. However, the potential window (obtained from LVS) is very small. Please how can I improve the operating...

31 January 2021 3,340 9 View

What is the best procedure for measuring the pH of aqueous colloidal systems?

There has long been a debate among my colleagues about measuring the pH of aqueous colloids. As I see there is no general truth in the matter, so I ask this question below. What is the best and...

31 January 2021 8,203 3 View

Is carboxymethyl cellulose a better electrolyte host polymer than methyl cellulose and cellulose acetate?

I want to prepare a cellulose-based biopolymer solid electrolyte by solution casting technique. However, choosing the right cellulose derivative has been my major challenge. Among the many factors...

30 January 2021 5,355 3 View

How can I implement a Generalized Estimating Equation method on spatially autocorrelated time-series data?

I used Generalized Estimating Equations (geepack in R) on my regularly monitored (twice a year) plant abundance data in grid cells to evaluate their trends of density. Since these are time-series...

26 January 2021 3,833 1 View

How to extract isodose lines from radiotherapy dose cloud into masks that can be overlaid on images using python?

I'm able to load a dose cloud into python as a numpy ndarray using pynrrd. The next challenge is to extract isodose lines (like V50%) to create masks (bitmap images) that I can overlay onto other...

19 January 2021 8,503 2 View

How to calculate percent of identity in aligned RNA sequences with a sliding window ?

Hello, I aligned some RNA sequences to identify if some part are similar. I would like to represent my result with the similarity in y-axis and the alignement in x-axis. I want to calculate this...

13 January 2021 7,833 3 View

Which peak should I consider when calculating ZIF-8's crystalline size from XRD?

Hello, Using the Scherrer's equation, one could calculate, roughly, the crystalline size of ZIF-8. However, I am confused as to which peak in the XRD pattern should be taken for the calculation?...

10 January 2021 8,633 3 View

Bio Rad CFX96 Touch Real time PCR System?

Dear friends I would like to ask about your experience with the instrument (Bio Rad CFX96 Touch Real time PCR System) and its performance. Also I would like to know if this version need...

29 November 2020 2,166 5 View

Why are the velocities so high in my Boussinesq approximation Fluent simulation?

Hello, I have a mechanism where air rises due to convective flows. In this simulation, nothing is driving the air except this. I understand that the Boussinesq approximation only works for small...

02 March 2021 4,910 3 View

Which is the most efficient etching solution for nickel based alloys?

Which solution reveals the microstructure and features of nickel-based alloys?

02 March 2021 2,221 3 View

What is the characteristic length to determine the Reynolds number for the scattered turbulent fluid flow?

Dear all, I just saw this example in FB on the difference between laminar flow and turbulent flow. The flow from a pipe hits the sink and scattered. The flow from the pipe is characterized as...

02 March 2021 1,999 5 View

Can we distinguish the type of free fluid inside the pelvic and abdominal cavities whether blood or serous fluid using the ultrasound?

during ultrasound examination of acute abdomen, sometimes we see free fluid , can we know the type of fluid ,whether blood or not , using ultrasound only? if yes , what are the sonographic...

01 March 2021 7,476 4 View

How much pressure we can reduce at the outlet to avoid Reverse Flow?

I am simulating Heat Exchanger. I have tried and tested all the methods to resolve this issue from the internet like refining mesh, improving skewness and orthogonal quality ,extending outlet to...

01 March 2021 6,985 3 View

How to show arrows over the streamlines in CFD-post?

I follow this to make streamlines like the photos attached below: (software- CFD post-processing) First I plot the 2D streamline over a surface "streamline 1". them I plot a vector by the...

01 March 2021 8,668 3 View

How to increase mesh quality of a cfd model in ansys fluent?

How can one improve mesh skewness, orthogonality, aspect ratio?

28 February 2021 7,730 3 View

No title

I am trying to find how to know the density needed for a pva electrospinning in a 0.6mm neddle, the electrospinning will be from top to bottom and the problem I really have is the solution because...

25 February 2021 2,615 3 View

Why do the air flow results vary totally when adding scalar in CFD ?

Dear All, We are using Autodesk cfd to calculate the air flow in a single sided naturally ventilated room, where air flow depends only on buoyancy due to temperature difference between inside and...

25 February 2021 9,602 4 View

Is the a way to contol flow (Flow velocity) without impacting pressure value?

I have a pipe with 10 mm in Diameter and 2 bar pressure, the fluid velocity is 200 m/s, the fluid is air. is there a way to reduce velocity without affecting the pressure value?

25 February 2021 7,187 3 View

Mohd Nadeem Bhat

Why you want grain size >100 micro meter

A. V. Koltygin

Maybe this article will help you. The grain size is controlled through GRF here. Usually the target is to reduce the grain size, but here it was increased.

Adam Vida

Thanks for this article, it is really helpful!

We want to produce single crystal micropillars with FIB, that is why we need huge grains.