Are there some methods that can be used to directly reveal the interactions among metastable pitting events?

11 July 2016 0 5K Report

Is or is not there a interaction among metastable pitting events taking palce at different sites in austenitic stainless steels? How to directly confirm such interaction?

Badges
Science topic

Similar topics
Engineering
Modeling

More Guanshun Bai's questions See All

Does the first semicircle represent contact resistance, and what is the reason for its generation?

My research topic is the corrosion of gray cast iron in methanol. EIS measurements were conducted at open circuit potentials (Eoc) using a sinusoidal signal with the amplitude of 10 mV from 100...

05 June 2024 6,891 2 View

About MIL-125 XRD pattern ?

I tried to synthesise different morphologies by adjusting the ratio of DMF to methanol. When the DMF and ethanol ratios were 9:1 and 7:3, the XRD images of the samples showed a diffraction peak...

08 April 2024 4,336 4 View

Why the Mg element is rarely found in high-entropy alloy designs?

A very interesting phenomenon, for the existing high-entropy alloy design, the use of more elements are Fe, Ni, Co, Cr, Mn, Al, V, Ti, Zr, etc. However, the Mg element is rarely found in HEAs....

09 January 2024 2,599 4 View

Inquiry Regarding SWAT Model Operation for Pesticide Concentration Simulation?

I am a researcher at the Sun Yat-sen University, China. I am currently working on a research project that involves the simulation of pesticide concentrations in surface water using the SWAT model....

08 January 2024 1,237 0 View

In ICP-OES, how the characteristics of particle, or its interaction with the plasma, will influence the signal?

I am wondering the possible influencing mechanisms of plasma on particles. Thanks for your attention : )

30 August 2023 5,799 0 View

How can I use an ANN to predict land use?

How can I train an ANN using current raster data (population, precipitation, DEM, land use) and use this model to predict future land use based on upcoming raster data (population, precipitation,...

23 August 2023 6,487 1 View

Change the pH of my PDB which contains modified residue(acetylated lysine) and ZN?

The pH of my crystal PDB is 5.5, but I would like to perform a simulation under pH=7. I used PDB2PQR to change the protonation state, but because my structure contains a modified residue...

16 July 2023 523 0 View

Missing heavy atoms (using pdb4amber to convert the PDB file)?

I downloaded my pdb file from RCSB. Cuz I want to use amber tleap, I used pdb4amber to convert the PDB file. Then the error occurred: GLU_29 misses 4 heavy atom(s) ARG_102 misses 6 heavy...

18 June 2023 5,833 2 View

How about focusing the laser to less than 1um without losing most of its energy?

1. I am currently using a 532nm laser and NA = 0.6 objective lens for laser focusing, (the spot size of the laser outlet is 2mm, then expand the beam 4 times, and finally through several mirrors...

25 April 2023 7,181 11 View

How to achieve the tool breakage detection methods with milliseconds level time response?

Greetings, It is well known current TCM systems that detect tool breakage within one second. However, in high-speed machining, the workpiece surface integrity may be impaired. How to achieve the...

29 March 2023 9,472 2 View

How can I apply boundary conditions in an orthotropic steel deck numerical model using ABAQUS software?

I am trying to simulate vehicular loading on an orthotopic steel deck bridge section in ABAQUS software. The red arrow mark in the attached figure indicates the direction in which the vehicle will...

08 August 2024 719 0 View

How to fix errors in my heat transfer steel structure with reinforced concrete slab model Abaqus?

I have modelled a steel structure using beam elements in Abaqus and attached to this structure reinforced concrete slab. The analysis that I am making is heat transfer of the structure. The...

07 August 2024 1,028 0 View

If we are using snowball sampling technique, how do we justify the true representativeness of the sample statistically? is there any statistical test?

Are there any statistical methods to justify your sampling technique using SPSS or AMOS?

05 August 2024 9,153 4 View

What are possible strategies can be used to analyze data under sequential explanatory mixed method approach?

Better ways to analyze the qualitative and quantitative data in a sequential explanatory mixed method approaches

04 August 2024 2,703 6 View

Why 3 replicates for most biological assays? Is it enough to examine the data fits normal distribution?

Just bounced on me. Before statistically analysing significant difference, shouldn't we see if data fits normal distribution first? Is 3 replicates enough to testify the hypothesis of normal...

31 July 2024 8,141 13 View

What should be the sample container for the hydrothermal reaction in a microwave reactor at 180 °C for 10 min at the heating rate of 5 °C per minute?

Suggest one of them 1. Teflon-lined stainless steel autoclave: 2. Alumina (Al2O3) ceramic container

30 July 2024 7,326 1 View

Which statistical test should we use?

N=6 Comparing pre and post test likert scale responses. Participants are mix of practicing & preservice teachers.

30 July 2024 7,233 4 View

Request for Advice: Starch Metabolism Research Project?

I am currently considering a research project focusing on a comparative analysis of starch metabolism in orchids and roses. I am particularly interested in identifying the types and quantities of...

30 July 2024 4,267 2 View

Can the limit of quantification (LOQ) of an analytical method fall outside its linear dynamic range, or must it always be within it?

Can an analytical method's limit of quantification (LOQ) be outside its linear dynamic range, or is it always required to be within it? Please provide a thorough explanation supported by verified...

29 July 2024 7,198 9 View

Pragmatic inquiry research design?

Employing a pragmatic inquiry research design, looking for published research using this method, employing qualitative research data collection methods of semi-structured interview and focus...

28 July 2024 540 2 View