In a holly-core fiber, should the effective index of the fundamental mode be higher or lower than the core refractive index(n=1)?

Hi, I was wondering in hollow-core fibres should the effective index of the fundamental mode be higher or less than the core's refractive index (in this case, n = 1 because the core is filled...

17 January 2021 2,220 3 View

Is there a way to measure energy dissipation in Matlab/Simulink?

I am trying to measure the energy in (Joules) in a Surge Arrester MOV. I am simulating a Hybrid DC circuit breaker.

17 April 2020 259 3 View

How can I trip an ideal switch when a short circuit fault occurs?

I am simulating a Mechanical DC circuit breaker. I used a step to put on and off. I wanted to use a "compare to constant" block so that when the fault current goes over the threshold the ideal...

24 March 2020 1,709 3 View

DC circuit breakers?

Hi I am trying to simulate DC circuits; MCB, SSCB and HCB but i cannot find a model i can use. Does anyone know a journal or a simulink model i can use. Any help will be really appreciated. Thanks

17 March 2020 7,696 3 View

Can a research paper be sent to two journals at the same time, just to save time in case one of the two rejects the paper?

Most of the academic journals take so long just to review the research paper, and most of the times they reject the paper. I was wondering if any researcher can send his paper to two journals,...

18 July 2019 4,444 9 View

Can any body Suggest me a set up that I can build it up to study the surface roughness of transparent polymeric fibres?

I need to study the surface of nylon-6 blank fibres with a thickness of nearly 40 micrometre, I work in optics lab with many optical components such as beam splitters, lenses, mirrors ... etc, can...

18 March 2019 236 3 View

Active site of the protein: how much can it be changed before losing function?

How much spatial change can amino acids of protein's active site withstand before being unable to perform protein's function? We can, for example, compare X-ray or NMR structure of protein with...

16 November 2016 4,954 3 View

What may be the result/product when curcumin react with aniline or any other amine compound?

Could you please answer for what may be the result/product when curcumin react with aniline or any other amine compound, pls suggest some references if possible. Some of researches are found as...

07 May 2016 286 4 View

Can anyone suggest to me any antimicrobial activities of manganese oxide nanoparticles?

10 March 2016 3,709 3 View

Polyaniline composite with TMA, DMA and MA?

Polyaniline-based composite on GCE used for trimethyl, dimethyl and methyl amines through CV. In the case of TMA and MA the peak height was increased with increasing concentration, whereas DMA...

09 January 2014 9,090 3 View

Is There Any Feasible Method To Test Fluorescent Compounds Other Than Fluorescence Spectrometers ??

Is There Any Feasible Method To Test The Efficiency Of Fluorescent Compounds Other Than UV Spectrometers ? Suggestions Would Be Appreciated !

02 March 2021 5,785 3 View

Any research papers for extraction of nutrient deprivation on macroalgae? Analysed by HPLC-UV and GC/MS. Possibly from macroalgae genus Rhizoclonium?

I am doing my thesis on the nutrient deprivation on the macroalgae Rhizoclonium sp. I will be analysing the levels over a period of roughly 5 days by HPLC-UV and GC/MS. I will be using seawater as...

28 February 2021 6,477 1 View

How can I simulate the optical absorption spectrum of a biomaterial (like DNA or protein) in COMSOL?

I need to simulate the optical properties of a biomaterial, namely DNA, in COMSOL. Basically I need to simulate the IR absorption spectrum of a cylinder filled with a 'concentration' of DNA. I am...

21 February 2021 3,043 3 View

Could the "incoming radiation (net radiation)" values be negative?

Could the "incoming solar radiation" values be negative? What is the difference between "global solar radiation" and "incoming solar radiation"? Which one might be measured negative values?

21 February 2021 7,726 9 View

Interpretation of a fluorescence Emission spectrum ?

Hello, i work with a spectrometer which only render the fluorescence emission spectrum. Until now i just found how to interpret an exitation- and emission spectrum together to generate deeper...

20 February 2021 1,291 3 View

In methylene blue test Why is UV absorbance reading very low as soon adsorbent is added and then increasing before reaching equilibrium?

Hello, I'm working on removal of methylene blue. 01. in the dark test very first reading is taken 15 minutes after adding adsorbent to the dye solution and that UV absorbance reading is very...

19 February 2021 472 5 View

How to correctly choose the number of solution intervals when preforming harmonic analysis in ANSYS?

Good day, I design the rail-wheel geometry and the harmonic frequency ranges between 20-10kHz with 500Hz solution intervals and the results makes sense. Most of the time on the related literatures...

19 February 2021 3,190 3 View

How to determine the drug loading and the drug release capacity of a polymer micelle using UV spectroscopy?

Currently, I am working on PLA-PEG copolymer micelle for the drug delivery system. I have seen several papers where some researcher talks to centrifuge the drug-loaded micelle to separate the...

13 February 2021 5,822 7 View

How to calculate ultraviolet dose in Gy or J/kg?

Currently I'm doing a literature review regarding the comparisons of different types of radiation such as uv, electron beam and gamma radiation. But I'm having a difficult time converting uv unit...

11 February 2021 7,642 3 View

What is the UV-vis spectroscopy and HPLC UV detector?

I did spectrum scan to levothyroxine sodium which show highest absorption at wave length=230nm which the absorption =0.136 and it's absorption at 225nm =0.047 but when Injecting it on HPLC...

09 February 2021 1,631 3 View