I need information about annealing the impulse for bulk amorphous materials
Thank you very much. This is a very good book.
I mean materials with a value of coercivity in the range of 500-5000 A/ m.
03 April 2016 2,797 0 View
11 December 2015 6,768 1 View
11 December 2015 2,443 4 View
I want to apply the apparatus to produce amorphous alloys by sucking in cooling the mold pairs of nitrogen rather than water. The chamber is an inert gas argon.
11 December 2015 1,915 0 View
I'm interested in how to interpret the transition between the grain and the amorphous matrix.I am interested in metallic materials. Andrew thank you for your attention. The transition phase...
11 December 2015 572 11 View
11 December 2015 7,270 5 View
The component is well separated with a small probability. Of course, in terms of schedule for amorphous alloys. The spectra performed in transmission geometry.
11 December 2015 6,941 1 View
I mean if someone did ferromagnetic amorphous with two separate magnetic phases at different temperatures Curie. In addition, if these materials have a high Ms small Hc.
10 November 2015 6,828 8 View
effect of double bond on the flexibility of polymers
07 April 2021 0 0 View
I am writing to request some information for making polymer color flakes. I would appreciate the help.
17 March 2021 0 0 View
I looking for ferro calcium production process
03 March 2021 1,755 4 View
Hello everyone. Given microstructure image belongs to a 12% ledeburitic cold work tool steel (annealed and tempered). The sample was etched with picral (100 mL ethanol and 4 g picric acid). I...
02 March 2021 4,119 3 View
Which solution reveals the microstructure and features of nickel-based alloys?
02 March 2021 2,221 3 View
As I was tweaking step-by-step OpenCalphad6 Macros step1.ocm involving phase and thermal property calculation of a High-speed steel, I could not incorporate more than 6 elements in the steel...
01 March 2021 8,840 1 View
I have created an Ice 1h crystalline structure and an Aluminium substrate structure and equilibrated both at 250K. Now I need to bring them together in a way that an adhesive bond is created....
01 March 2021 3,325 2 View
I'm Juan Carlos, a high school student who is working with electropinning, I made an electropinning machine with a 21g needle and a 30kv high voltage source and the distance between my needle is...
28 February 2021 298 3 View
I would like to get more information on the cyclic compressive fatigue testing (BS EN 12697 - 25) which is typically done for bituminous material in pavement design. Any one can advise on the...
28 February 2021 2,004 3 View
I am working on developing a micromechanical FE model for predicting kink-band formation in UD composites. To model matrix plasticity, which model, out of Concrete Damaged Plasticity and...
28 February 2021 5,415 1 View