Antioxidant properties

How to increase a model accuracy ?

dear community, my model is based feature extraction from non stationary signals using discrete Wavelet Transform and then using statistical features then machine learning classifiers in order to...

03 March 2021 6,994 5 View

What is the production process of CaFe ferroalloys?

I looking for ferro calcium production process

03 March 2021 1,755 4 View

Resistor definition in Piezoelectric bimorph with ANSYS workbench

Hello, good day! I am trying to simulate similar bimorph piezoelectric harvester with below commands. However, the output power doesn't change with resistor value. Please help to find the reason. ET,10,CIRCU94,0 !SET UP RESISTOR R,1,100000 !RESISTANCE VALUE TYPE,10 !SET ELEMENT TYPE E,1,2 !CREATE RESISTOR BETWEEN NODES 1 AND 2 Thanks in advance Regards,

02 March 2021 0 0 View

Is there a powerful system for the security of the systems distributed on IoT systems?

02 March 2021 3,858 10 View

Where can I find life cycle inventory or assessment of non woven materials?

Dear network, I am looking for the LCA or LCI or at least the energy balances of the non woven fabrics process for my master project, in specific for natural fibers, yet I have found...

02 March 2021 9,662 1 View

How Relativistic effects is one reason for lanthanide contraction?

The Lanthanide contraction which is the decrease in ionic radii of the elements in the lanthanide series from atomic number 57, lanthanum, to 71, lutetium, is due to poor shielding of the 4f...

01 March 2021 2,272 4 View

For modelling epoxy-based matrices (in composites), which model in ABAQUS is the most suitable, Concrete damaged plasticity or Drucker-Prager model?

I am working on developing a micromechanical FE model for predicting kink-band formation in UD composites. To model matrix plasticity, which model, out of Concrete Damaged Plasticity and...

28 February 2021 5,415 1 View

Necessary tube lenght to cool Natural gas in a dry-ice cooling bath?

I have a tank which contains natural gas at 250 Bar and 293 Kelvin. I want to cool the gas in a dry-ice cooling bath to about 195 Kelvin. The gas will flow in a copper-tube through the bath with a...

27 February 2021 8,128 1 View

Exit velocity of natural gas from pressurized tank?

Hi Guys. I'm a mechanical engineer and have a bit trouble, would be very glad if you could help me with my questions. I have a pressurized tank which contains Natural Gas at 200 Bar and 293...

26 February 2021 6,253 3 View

Can anyone share his experience regards Smoothing in origin?

I am working on TiO2 composite material and the results of XRD have a lot of small/junk peaks and while I apply a smooth filter in Origin then the other characteristics peaks disappear so anyone...

26 February 2021 8,183 3 View

Dhia Ahmed Taain

Please check the following links

http://www.globalsciencebooks.info/Online/GSBOnline/images/0906/FPSB_3(SI1)/FPSB_3(SI1)60-68o.pdf

http://www.globalsciencebooks.info/Online/GSBOnline/images/0906/AJPSB_3(SI1)/AJPSB_3(SI1)1-6o.pdf

http://www.deckerfarm.com/anitoxidant.pdf

https://www.researchgate.net/profile/Muhammad_Khan133/publication/259115505_Assessment_of_Antioxidant_Potential_Total_Phenolics_and_Flavonoids_of_Different_Solve

http://www.ifrj.upm.edu.my/17%20(01)%202010/(11)%20IFRJ-2010-97-106%20Rohman%20Indonesia.pdf

https://cdn.intechopen.com/pdfs-wm/44100.pdf

http://pubs.acs.org/doi/abs/10.1021/jf1008692?src=recsys&journalCode=jafcau

Article Assessment of Antioxidant Potential, Total Phenolics and Fla...

Yanina Benedetti

Hello,

I send you the following articles and links. But, if you are also interested in methods to test it, let me know.

Best regards,

Yanina

Links

http://www.sciencedirect.com/science/article/pii/S0963996911001840

http://www.mdpi.com/1420-3049/22/7/1114

https://www.ncbi.nlm.nih.gov/pubmed/20100535

Majid Abdulhameed Ibrahim

Please see you these links.

https://www.ncbi.nlm.nih.gov/pubmed/12017203

http://www.sciencedirect.com/science/article/pii/S0308814603001602

https://link.springer.com/article/10.1007/s11483-007-9047-2

http://www.annclinlabsci.org/content/32/2/193.long