Advanced Oxidation process ?

More Abubakr Mustafa Elkhaleefa's questions See All

For learning PSCAD and PSS/E softwares. Are there any free training courses/lectures you can recommend or share with us?

I need to learn more about the connection study of inverter based resource. Modeling of renewable energy source integrations and their control design. Additionally, I want to understand how we can...

17 February 2024 5,204 2 View

How can i conduct (safely) the reaction of aluminium with hydrochloric acid ?

i need to prepare a catalyst (aluminium chloride ) , it is a product of the aluminium reaction with hydrochloric acid . BUT the problem is ; Hydrogen gas will come out , which is very dangerous ,...

19 December 2023 9,737 10 View

Hi All how can i estimate or select the parametrers weight (wi)while using the water qualty index to evaluate the qualty of the water?

04 July 2023 8,430 2 View

How can we know which criteria (ISE, IAE, ITSE, and ITAE) will be the best for my work, especially for power system applications?

Most of the researchers use performance standards for stability analysis such as Integral square error (ISE), Integral absolute error (IAE), Integral time absolute error (ITAE), and Integral...

16 March 2022 539 19 View

Can anyone brief me how to get the properties of mixtures in Engineering Equation Solver?

I have two binary mixtures for analyzing Brayton cycle. The mixtures are: CO2+Ar and CO2+Butane Kindly help me how to call enthalpy, entropy and other thermophysical properties using EES.

13 August 2018 3,719 4 View

Why we obtain different exergetic efficiency from two definitions of exergetic efficiency when analyzing a thermodynamic power cycle?

There are two definitions of exergy efficiency. i.e. 1. eff = Wnet/ Exergy In 2. eff= 1- (exergy destruction/ Exergy In ) While analyzing supercritical CO2 power cycles, the exergy efficiency...

10 April 2018 2,026 5 View

How can I estimate the area of heat recovery heat exchanger having flue gases on one side and supercritical CO2 on the other side?

I want to calculate the area of heat recovery heat exchanger with supercritical CO2 as working fluid for recovering heat from flue gases.

29 January 2018 5,993 5 View

How can I calculate exergy destruction in combustion chamber of a gas turbine Brayton cycle for inlet states, mass flow rates and complete combustion?

The enthalpy and mass flow rates of air after compression, mass flow rate of inlet fuel (CH4) and mass flow rates after combustion reaction are known. Complete combustion is assumed in combustion...

25 November 2017 5,419 14 View

How to use routing protocols come with INET in omnet++?

I am plan to use some routing protocols come with INET such as rip, ospf in wireless sensors network. my idea is to start with wireless tutorial comes with inet. my question is how I could merge...

30 June 2016 2,589 10 View

What is the effect of the plate thickness and column size on the moment transfer at the plate column-interaction?

the plate column interaction the one can say that Mcolumn = K EI/ L Where: K= 4, for case of rigid connection. But when the plate thickness is getting smaller compared to the size of the column,...

21 June 2016 8,888 3 View

What is the reason for current dropping in OER , LSV curve?

I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...

10 August 2024 3,629 1 View

Adhesion strength of coating?

How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...

10 August 2024 942 3 View

Do interactions between biosphere, carbon cycle, & water cycle impact global warming & interaction between atmosphere & hydrosphere?

How do interactions between the biosphere, the carbon cycle, and the water cycle impact global warming and interaction between the atmosphere and the hydrosphere?

09 August 2024 3,291 2 View

Who of all of you will help TPEOM to re-originate the Earths atmosphere to it original 5 atmospheric elements/gases?

Global ‘Weather’ has stopped, as ‘aqua thermionic instituted by the ‘Global thermo atmospherics has instituted global thermodynamics of 120º C + and thus all waters are, or have boiled into a...

06 August 2024 8,716 0 View

Could dyes amplify the spectrum of light to a specific wavelength?

I am interested to know the behavior of dyes toward light. Specifically, Blue dyes re-emit the spectrum, especially from the green zone (known as principal in LED lamps, and blue dyes are known...

05 August 2024 3,290 1 View

How to report results of Generalised Linear Mixed Models in a journal article?

Hi everyone, If you have written or come across any papers where Generalised Linear Mixed Models are used to examine intervention (e.g., in mental health) efficacy, could you please share the...

04 August 2024 4,130 4 View

Why results of ROS flurescence are negative as there was no bacteria within?

Hello. I am working on ROS production of two systems: system A is cerium oxide and hydrogen peroxide, system B is cerium oxide nanoparticle, hydrogen peroxide and potassium bromide. I did some...

04 August 2024 5,974 3 View

Why aren't most metal oxides insoluble in water?

Why BaO (s) + H2O(l) ---> Ba 2+(aq) + 2 OH - (aq) if Oxygen loves owning all the electrons, why would it bind to hydrogen which competes with Oxygen for electron ownership more so than...

03 August 2024 5,392 1 View

Why chloride turns into chlorine gas in a Downs cell?

I imagine the battery drives the graphite into a carbocation, then chloride is oxidized to donate the electron to the carbocation, but what pushes the lost electrons of chloride to be shared...

03 August 2024 5,384 0 View

How to calculate the molar proportions of the oxides from the XRF analyses?

02 August 2024 2,565 2 View

Paul Milham

Hi Abubakr, You might get more responses were you to indicate what is to be oxidised, how much, and under what conditions, Paul.

Abubakr Mustafa Elkhaleefa

Thank you so much for your kind response.

Actually the waste water under this process is oily waste water (petroleum hydrocarbons such as gasoline , diesel ..etc) , quantity is around 10 L per run , Hydrogen peroxide is used along with UV light, max operating time 3 hours , these are all the conditions.

I hope that you have a useful response