3D scanning of objects?

More Salah Amroune's questions See All

MAGeCK Plotting Error: Logarithmic Axis Must Have Positive Limits?

I have been running a MAGeCK test command on the terminal for a CRISPR screen to rank sgRNAs and genes based on the read count tables. However, I get only the plot of the top-ranked genes...

28 July 2024 9,811 1 View

Getting small dark current when simulating the Photovoltaic device Using the SCAPS-1D?

When I simulate the solar cell or self-power photodetector in SCAPS-1D, I optimize all parameters, Once I check the dark current at 0 voltage, the current is high in a range of (e-16-e-25), as...

06 July 2024 1,782 3 View

How to calculate Capacity retention for Lithium metal battery?

I have prepared half cell. Lithium is considered as anode in the system. Whereas, I would like to know what is actually capacity retention? How it can be calculated mathematically? On what factors...

02 June 2024 4,135 0 View

Is there a free trial of the SILVACO TCAD ?

I wan to simulate the 2D Photodetector

22 April 2024 8,756 0 View

Is there a company known that can design an electrode shadow mask for photodetector ?

I want to design electrode shadow masks for photodetectors .The shadow mask can be made from uncontaminated materials. We do not have lithography fabrication at my university, so i want to design...

12 April 2024 2,312 3 View

What is the reason that a Li-ion coin cell is not showing efficiency on neware battery testing system?

I have been working on electrospun membrane for Lithium Ion coin cells. I have tried to control different parameters, such as, thickness, electrolyte amount and many other parameters. I am facing...

26 March 2024 2,786 0 View

Is this journal legitimate (Tobacco Regulatory Science ISSN: 2333-9748 ) ?

I'm considering submitting a manuscript to this journal (Tobacco Regulatory Science ISSN: 2333-9748 ) Has anyone published in this journal before? I am looking to confirm that this journal is...

05 March 2024 4,144 1 View

What is the agricultural area using center-pivot irrigation in Egypt and how many center-pivot irrigation devices are there?

area using center-pivot irrigation in Egypt Number of center-pivot irrigation devices

16 February 2024 1,376 0 View

Is there absolute truth in marketing?

From the perspective of epistemology, is there absolute truth in marketing?

02 February 2024 9,182 6 View

Journal of Materials and Manufacturing (JMM)?

New Journal of Materials and Manufacturing (JMM): JMM is published two times per year in july and December: https://jmatman.org/index.php/journal

14 January 2024 7,729 0 View

How can I prepare virus for a TEM or SEM imaging?

I have virus (viral hemorrhagic septicemia virus) in suspension and the experiment will not involve cells. What level of TCID50 is preferred?

11 August 2024 3,115 1 View

Can you suggest reliable sources defining "3D mesh" and "3D city models"?

Dear fellow researchers, I am currently working on a paper where I need to provide a reliable reference that defines and distinguishes between 3D mesh models and 3D city models. Although I am...

06 August 2024 9,986 2 View

What are the shear and normal stiffness values of an LLDPE liner in 3D numerical modeling of a stockpile?

I am seeking experimental or applicable data for the liner (LLDPE) interface in FLAC3D numerical modeling of a large stockpile. Could you please recommend suitable references? The preferred data...

05 August 2024 3,665 0 View

Is it necessary to covary exogenous constructs in a structural model?

I am working on a SEM model where i have 7 latent variables (6 exogenous and 1 endogenous). In AMOS when I co-vary the exogenous constructs, only 2 paths are coming significant out of 6. But when...

03 August 2024 6,028 4 View

In SEM, if a latent variable consists of three observed variables, and each observed variable has four items, what should I do?

Suppose I am studying the construct of "Academic Motivation" (latent variable) in students, which is measured through three observed variables: "Intrinsic Motivation," "Extrinsic Motivation," and...

31 July 2024 3,913 6 View

CAD File of human's & rat's respiratory airways ?

Dear all, I am working on particle deposition in human's & rat's respiratory airways using CFD and I am looking for the 3D CAD file for my simulations (STEP or IGES format). If somone has such...

29 July 2024 1,092 2 View

Bootstrapping in SEM Amos ?

Can a researcher use small sample size of 40 while using SEM with bootstrapping of 1000 and is it possible to get published

28 July 2024 4,402 2 View

Does it exist some special technique for cutting ceramic membranes for Cross-sectional FESEM images?

Does it exist some special technique for cutting ceramic membranes for Cross-sectional FESEM or SEM images?

25 July 2024 5,482 2 View

Comparing Liposome Size: DLS Measurement vs. SEM Observation with Air Drying ?

I have an issue with SEM imaging of liposomes. When measured by DLS, they appear to be around 120 nm, but when using SEM with simple air drying, they appear much larger, around one micrometer.

25 July 2024 3,395 3 View

Cell optimization in 1D Nanotubes?

Dear All, I use Quantum Espresso. I want to optimize the structure of the carbon nanotube using the vc-relax. I got confused about how to fix cell_dofree here. For 3D, cell_dofree = 'all' or...

22 July 2024 5,708 0 View

Mohamed Slamani

Artec Micro has up to 10 microns accuracy and 0.029 mm resolution.

it's an ultra-high-precision metrology-grade desktop 3D scanner, ideal for quality control, reverse engineering, jewelry, as well as medical/dental objects. Excels at capturing small objects with complex and intricate surfaces.

Salah Amroune

Thank you Professor for your suggestions.

Raoul G. C. Schönhof

Hi Salah Amroune ,

I worked in the domain of photogrammetry from aerial imagery and as far I can tell, the image quality is less important than the algorithm/program used for calculating the model. Maybe this helps your consideration.

Cheers

Thank you Dr. Raoul for the answer.