Yasmeen Ghassan

7 Questions 19 Answers 0 Followers

Questions related from Yasmeen Ghassan

Help! CSI SAFE results give massive steel amounts in specific areas, how to solve this?

i have modeled RC footing system for 5 floors reinforced concrete structure using CSI safe, after exporting the reactions of base from CSI ETABS, noting that i have taken the restraints of...

11 November 2018 5,973 10 View

Help Please!! how to solve the error "too many attempts made for this increment" in abaqus?

i am applying a load of 50KN gradually on a reinforced concrete beam, i'm unloading this load using an amplitude to get the loading and unloading versus deflection graph.i have used concrete...

06 June 2017 278 16 View

How to calibrate concrete damaged plasticity parameters to get closer to lab results?

I am modeling a reinforced concrete beam using concrete damaged plasticity model, in the attached graph I have load vs deflection (loading and unloading stages) the red line represents lab...

06 June 2017 2,690 1 View

How to model a wheel truck moving on RC simply supported beam in abaqus?

hello everyone, i want to model a moving load (truck wheel) on an RC beam (concrete is modeled as 3D stress element and the steel bars are embedded in it as truss elements) does anyone of you have...

04 April 2017 4,616 2 View

How to get the frequencies of simply supported RC beam when changing load in ABAQUS?

i have modeled the RC beam with simply supported BC and used concrete damaged plasticity model to account for the nonlinearities in concrete, i have got the frequency value for the case of beam...

01 January 2017 3,882 7 View

How can i model simply supported RC beam with different static loading on it to get different frequency due to the increase in load in ABAQUS?

i have modeled the RC beam with simply supported BC and used concrete smeared cracking to account for the nonlinearities in concrete, i have got the frequency value for the case of beam under its...

12 December 2016 6,672 11 View

What to consider when using smeared cracking model in abaqus to model an RC beam?

i have used damaged plasticity model in abaqus to represent concrete for RC beam modelling, i have got good deflections compared to literature. but when using smeared cracking model for the same...

01 January 1970 3,282 2 View