10 Questions 16 Answers 0 Followers
Questions related from Srinidhi Bheesette
Greetings, I have a 2eV electron accelerating towards an accelerating plate at a potential of 400V for a distance of 0.1mm (so it experiences an electric field of 400V/0.1mm) before it deposits...
18 February 2022 2,137 0 View
Hi friends, I am currently dealing with a multi-anode x-ray source and would like to get it integrated with a CCD camera. A range of high voltage can be set to the x-ray source. I was wondering...
21 November 2019 5,616 5 View
Hi Guys, I am planning to use primer POP manufactured by Permabond to stick polyethylene (6mm) on an Aluminum metalization layer....
01 February 2018 2,242 0 View
I have a DC-DC converter (input rating 9-36V/5.9A and output 12V/3.4A). I am supplying power to this DC-DC converter using a power supply rated (12V/10A). This power supplied by this DC-DC...
08 December 2017 3,088 3 View
I wish to moderate alphas of energy 5.4MeV from an Americium 241 source to 2MeV. What type of moderator would be suited for this? Cheers Shri
17 May 2017 2,398 1 View
Do you know if there is a similar database with stopping power and range tables for neutrons just like there are for electrons, protons and alphas respectively...
27 April 2017 4,058 8 View
I observed a differential signal (picture attached) on two channels C1 and C2 on a 200MHz Oscilloscope with probe set at 10x. As seen as from the picture the amplitude of the positive signal is...
04 March 2017 1,662 2 View
I am measuring the attenuation of a pulse at different freq from (1 to 100MHz) through a AWG24 LVDS cable using a pulse generator at one end and observing the signal on the CRO at the input and...
20 February 2017 7,764 19 View
I am calculating the attenuation of an LVDS cable by observing the voltage at both the ends using a CRO when connected to a readout. I am using the formula attenuation = 20 log10(Vout/Vin). Is...
12 February 2017 5,947 3 View
I have been trying to plot the detection efficiency of polyethylene (the conversion layer we are using to detect fast neutrons >1 MeV) for various thickness (1300 and 2000 microns) and compare...
27 January 2017 3,628 7 View