Sajith S

9 Questions 62 Answers 0 Followers

Questions related from Sajith S

How to get K1 and K2 from J-integral for mixed mode?

I used ANSYS for mode I and mixed mode crack analysis, J-integral is used to obtain the stress intensity factors. In mode I, one can obtain the KI value using J-int (J=KI2/E, for plane stress...

02 February 2017 629 3 View

Is it possible to carryout fatigue crack propagation with automatic remeshing in ANSYS APDL ?

Is it possible to carryout step by step fatigue crack propagation with automatic remeshing around the crack tip (with or without defining the crack path) using ANSYS Mechanical APDL?

07 July 2015 1,057 6 View

How can I determine slope and y intercept of trendline from matlab log-log plot?

I have a set of data and I plotted (scatter plot) those on log-log scale. Then I fitted a trendline to the data. NOw I need to determine the slope and y intercept of the fitted trendline. How to...

06 June 2015 6,920 0 View

How do you apply a sinusoidal load in ANSYS APDL?

I would like to apply a sinusoidal load to a rectangular plate in ANSYS.

07 July 2014 7,359 5 View

Is there any way to export the finite element meshes created in ANSYS (Mechanical APDL) to ABAQUS?

Ansys to abaqus

05 May 2014 3,127 6 View

Which parameters have to be considered while meshing a crack tip (other than using QPEs)?

What should the size of the crack tip elements be and the regular elements next to it?

03 March 2014 9,977 1 View

How to model a CTS specimen in ANSYS (mixed mode loading)?

I am modeling a compact tension shear specimen in ANSYS. How do I apply the loads (since in the actual model the load is applied through the pins)? What are the boundary conditions? The image of...

02 February 2014 9,579 2 View

Can anyone tell me how to perform a fatigue crack propagation analysis in ANSYS?

I am working on mixed mode fatigue crack propagation analysis.

02 February 2014 864 6 View

How to apply cyclic/fluctuating/alternating loading in Franc2D?

How to perform fatigue crack analysis using Franc2D software? I couldn't find how to apply cyclic/fluctuating/alternating loading in Franc2D.

01 January 2014 3,061 1 View