Randhir Kumar Singh

3 Questions 1 Answers 0 Followers

Questions related from Randhir Kumar Singh

What could be reason for decrease in ductility value in Cu-Cr-Zr-Ti welded to Ni base superalloy at 627 deg C?

It was observed that all the specimens failed in Cu-alloy base. The test was conducted from RT to 627 deg C. But it was observed that there was abrupt change in ductility at 627 deg C, the...

07 July 2018 584 2 View

How can I find the partial pressure of mixed gas when the flow rate of the gas is known?

gas consist of 15%CO2-3.5%O2-0.25%SO2 and balance N2. The flow rate of the pre-mixed gas is 80 ml/min. I want to the partial pressure of SO2, O2, S and other gases at temperature of 800 C

04 April 2015 8,567 2 View

How can I use peak matching to find an unknown compound from XRD data in either JCPDF/PCPDF or Xpert Highscore?

I would like know how to do peak matching to find the unknown compound from the XRD data using the either JCPDF/PCPDF or Xperthighscore. How can I efficiently use these softwares? Is it necessary...

03 March 2014 3,003 4 View