Pushkar Kamble

5 Questions 2 Answers 0 Followers

Questions related from Pushkar Kamble

What do the numbers mean in the following formula to calculate machining power?

Power required for machining = (Cutting force x Cutting Velocity) / (75 x 1.36 x 60) kW In some literature it is also given Power for machining = (Cutting Force/102) x (Cutting Vel/60) kW Here...

19 August 2024 4,672 2 View

How to take colour print in CMYK printer using only cyan and black colour?

I have an image with two different regions. I want to print one region with a mixture of Magenta + Yellow which I have printed using red colour since M + Y = Red; however another region I want to...

02 May 2021 1,012 1 View

Are there any non expensive monomers that can be polymerized at subzero temperatures?

The two-part monomers those can polymerize upon mixing even at temperatures in the range of -30°C to -50°C.

30 April 2021 8,690 3 View

How cooling time can be calculated in the Vapor Compression Refrigeration?

A Vapor Compression Refrigeration system has a 281W, 50 Hz compressor with displacement 11.1 cm3/rev. 50 Hz compressor has RPM 3000. The discharge pressure is 13.5 bar, the suction pressure is...

07 January 2021 3,814 3 View

Are there any commercial Inkjet Print Heads which can work for low viscosity liquids (Viscosity about 1 cP, such as water, etc.)?

Most commercial print heads are designed for 10 -12 cP viscosity. We would like to jet lower viscosity liquids.

11 February 2020 8,439 2 View