Pranshul Gupta

6 Questions 4 Answers 0 Followers

Questions related from Pranshul Gupta

Meshing in APDL

I needed to mesh a cuboid with variable mesh size. In the centre region (2x8x1 mm), I need to have hexahedral elements of 0.05mm and coarse mesh in the outer region. For this, I have made it in...

05 May 2017 4,280 1 View

How to set pop ups during APDL simulation to yes?

There is a do loop and it assigns new values to the variables in each iteration and ANSYS asks for confirmation to overwrite the variables.what can i include in my code to set this automatically...

03 March 2017 5,860 1 View

How can i calculate average temperature of an element in APDL?

There is a layer of alloy powder subjected to laser sintering. When the temperature reaches above a specified temperature , I need to change properties of that element from powder to sintered...

02 February 2017 5,259 0 View

How to calculate distance of each node from centre of moving laser(in each substep)?

Simulating a moving laser for Laser Sintering processI have used local cylindrical co ordinate system for locating center of laser on powder bed.However the energy distribution in laser spot...

01 January 2017 2,118 2 View

Can any one help me with "ealive" and "ekill" in ANSYS APDL?

I need to simulate laser sinteringIf possible can anyone suggest how to use these for the simulation

08 August 2016 4,874 0 View

In ANSYS APDL after killing certain elements in the beggining how can i activate them one by one in subsequent load steps?

I tried using ealive in every load step and solvedwhen i ran the animation over time it shows all the activated elements throughout the animation.What i want is that with time elements should come...

08 August 2016 7,462 6 View