Pavan Raja Gopal Peddinti Bhattaru

4 Questions 4 Answers 0 Followers

Questions related from Pavan Raja Gopal Peddinti Bhattaru

Can the exit temperature of air in a batch fluidized bed dryer be less than wet bulb temperature during constant rate drying?

Consider a batch fluidized bed dryer operated under negative pressure (sucks air through a blower in the exhaust line), during the constant rate period, air loses its energy adiabatically to...

06 June 2023 2,062 3 View

How to mathematically quantify the amount of heat loss from a hot atomized water jet into surrounding air?

Water is heated to 60 C and is atomized with compressed air into fine mist through a spray nozzle onto granulation bed. There is a drop in temperature observed in the water temperature upon...

07 August 2021 526 5 View

How to reduce the swelling rate of Rubber sample (thin disc) casted by evaporation from prevulcanised latex when immersed in toluene solvent?

I am carrying out research studies on improvement of rubber properties. while carrying out swelling behavior analysis with toluene, the sample is showing great deviation from the results showed in...

25 February 2020 3,787 2 View

What is the reason behind using potassium metal as a stabiliser for rubber latex? Are there any alternative sources for the same purpose?

Potassium metal is mentioned as a stabiliser for Prevulcanised rubber latex along with Sodium Lauryl Sulfate. Does the skipping of adding stabiliser affect formation of Rubber matrix? Are there...

25 February 2020 1,231 4 View