10 Questions 7 Answers 0 Followers
Questions related from Paul Thomas
I am using zn as active material using 90 mg with 20mg Polyvinyl butyral resin and droping the mixture using pippete on to steel surface after sonicating for 2 hours but the final coating gets cracked
2 weeks ago 7,258 1 View
I am trying to coat my sample through doctorblade but i am not able to get uniform coating, when i trying to spread my sample at some areas coating is uniform some areas its not uniform. One of my...
25 February 2025 1,670 1 View
I am confused which reference electrode i should use for simulated seawater for corrosion investigation Some people reported Ag/AgCl and some calomel which one is best and why ? My wroking...
20 February 2025 5,288 4 View
Is it refractive index
06 September 2024 392 3 View
I am trying to coating metal oxide into steel substrate, for better sticking planning to utilse epoxy based, Could you please suggest suitable curing agent for the coating purpose
26 July 2024 813 3 View
Is direct contact of polllutant and catalyst needed? or indirect contact just like photocatalyst wrapped inside glass can also create hydroxyl radicals and elimnate pollutants near to its wrapped...
24 June 2024 3,375 5 View
Is it safe to use plastic pippette or only glass pippette can use?
02 May 2024 750 5 View
Possible to etch iron but not aluminium
11 April 2024 8,509 2 View
Opinion about combining rgo and carbon derived from biomass Composite focus on watertreatment and eergy storage
16 December 2021 4,667 3 View
I am mixing moo3 with carbon material and kept it under autoclave for hydrothermal 180 c 6 hours, observed the formation of a green solvent after taking the hydrothermal reaction. I added 0.25...
13 March 2021 269 0 View