Pamier Pamier

7 Questions 7 Answers 0 Followers

Questions related from Pamier Pamier

How to design a gaussian profiled corrugated horn antenna?

Who has the related examples or detailed literatures ? Thanks!

05 May 2017 8,603 0 View

Who has the C++ codes of FEM for 3D Helmholtz equations?

Can anyone give me some codes based on C++ for solving the three-dimensional Helmholtz (or Maxwell) equations ? or tell me where can I find some related examples and codes ?...

04 April 2017 416 0 View

Why the simulation results of a same model are very different in HFSS and CST?

Export a antenna model from HFSS to CST ,but the simulation results from CST are unacceptable ,they are reasonable from HFSS , Why? After importing, should I make any changes in...

14 December 2016 6,173 7 View

About the VSWR of Corrugated horn antenna ?

the VSWR of a Corrugated horn antenna is too big ,but not at all the operating frequency,just at the lower part of the frequency,the operating frequency is all above the cutoff frequency,who...

18 November 2016 7,773 1 View

About the VSWR of Corrugated horn antenna ?

the VSWR of a Corrugated horn antenna is too big ,but not at all the operating frequency,just at the lower part of the frequency,the operating frequency is all above the cutoff frequency,who...

11 November 2016 7,750 1 View

How to find the phase center of a corrugated horn antenna in HFSS?

Under the Optimetrics of HFSS' project Manager. How to set to find the position of phase center of a horn antenna? Thanks!

11 November 2016 2,762 0 View

What can influence the phase characteristics of a corrugated horn antenna ?

observing the phase pattern of a corrugated horn antenna in HFSS , the phase gap between -20 deg and 20 deg is a little big, not reach the requirement ,who knows What can influence the phase...

11 November 2016 9,961 7 View