Nantakan Muensit

14 Questions 50 Answers 0 Followers

Questions related from Nantakan Muensit

Is it better to tie the polymer fibers incorporating with a textile than to coat a melting polymer upon the textile?

There should be a most effective way to make a tough textile (or cloth) and expend as little time as possible.

04 April 2014 3,789 2 View

What methods enhance the dispersion stability of the nanostructure in a DI water?

There should be several ways to increase the stability of the nanorods, nanowires in specific solutions, e.g., DI water.

12 December 2013 306 6 View

How does the application potential of the pyroelectric materials compare with Seebeck effect thermal energy harvesting?

In particular, for day/night temperature changes.

08 August 2013 7,143 1 View

Stems of nipa palm are often used to produce sugar, has anybody ever used them be raw materials for producing nanofibers?

This could lead to a value added application of the palms, which are not so popular as other palm trees.

05 May 2013 4,320 0 View

How to effectively improve the thermal conductivity of polymer materials approaching to that of diamond ?

We added some metal particles in polymer matrix, but it seems to be not effective enough.

04 April 2013 7,590 12 View

Are there any other ways or methods to reduce the toxicity of metal oxide nanoparticles ?

What if we make them into soluble form by just diluting them? Our target is ZnO and other II-VI compounds.

02 February 2013 8,589 16 View

Searching for scientists who have been working on nipa palm: fabrication, characterization and applications as phase change materials or other advanced applications.

Phase change materials, PCM, they should be produced from nanocellulose or high-fiber materials as a replacement for those salt-based PCM.

02 February 2013 3,020 2 View

What information is gained when a GaN thin film is free-standing?

GaN grown on silicon can be stressed. Is it possible to fabricate a free-standing one.

02 February 2013 4,622 1 View

Is it possible to scale down a polycrystalline film as thin as a couple of atomic lattices?

Nowadays, technology like epitaxy for semiconductors also works well for ceramics or not.

02 February 2013 9,811 2 View

What is the difference between 'Energy harvesting' and 'Energy scavenging'?

When we are discussing our research, we often come to meet difficulties in defining the sources of surrounding energy. What is your definition?

11 November 2012 4,766 28 View

Are there any lead-free ceramics converting a vibration into electricity for portable devices consuming a power of about 20 microwatt -or below ?

We are now working on lead-free piezoceramics such as BZT and wondering if we could harvest the power mentioned above from them.

11 November 2012 5,033 17 View

Is it possible to integrate a microcontroller with its own storage together with a patient's wheelchair in order to report his/her location ?

It is a manual wheelchair and its wheel's movement generates some output potential that can be stored in a circuit attached to the wheelchair.

11 November 2012 4,874 14 View

Searching for researchers with experience of circuits and wheelchairs or similar and who is also familiar with electronic sensors.

We are targeting some medical sensors /personal health care attaching with a wheelchair to service paralysis.

11 November 2012 212 20 View

Are there any sensors or embedded devices consuming a power between 1 microwatt - 100 nW and down below that ?

We are now working on seeking for a source of energy for feeding those devices. So far, our polymer materials could convert a little electricity out of streching motion.

11 November 2012 821 1 View