7 Questions 21 Answers 0 Followers
Questions related from Mustafa Alrayah Hassan
Are the reasons only to compliance with EMI regulations by eliminates the ripple generated from the CPL itself or maybe there are other reasons? Truly Yours
02 February 2018 6,248 0 View
When we apply constant power load across the open loop DC converters the response of inductor current and capacitor voltage will remains oscillated, reflecting the limit cycle behavior. Physically...
07 July 2017 8,228 6 View
As the detention of the passivity (a passive system cannot store more energy than is supplied to it from the outside, with the difference being the dissipated energy). For a simple RLC circuit...
06 June 2017 5,984 4 View
Using passivity-based control there are two stages to get a passive closed loop: 1.Energy shaping stage where modify the potential energy of the system.2.Damping injection to modify dissipation...
06 June 2017 6,423 3 View
Passivity-based control is the kind of nonlinear controller to achieve stability of simple electrical circuit, how can I expand this method to check stability for a complicated electrical...
06 June 2017 1,817 8 View
The following points not clearly understandable, could you please help me to make it clear. The major effects with the presence of a CPL in a dc power system are as follows 1. Reduces the...
01 January 1970 2,936 9 View
For a passivity-based control design the modification of dissipation energy function can be obtained by adding damping injection which is actually a virtual impedance matrix. which kind of this...
01 January 1970 7,933 4 View
