16 Questions 7 Answers 0 Followers
Questions related from Muhammad Talha
Which nanofluids(prepared from nanoparticles) will be added to PCM RT-42 to enhance its thermal conductivity considerably?
10 January 2022 9,268 2 View
Which type of turbine is better on a moving vehicle Darrieus or Savonius?
05 January 2022 6,475 4 View
Two methods of nanofluid preparation are known one is single step and other is double step
02 January 2022 467 8 View
The most common method for making nanofluids is a two-step procedure. The nanoparticles, nanofibers, nanotubes, and other nanomaterials used in this method are first chemically or physically...
01 January 1970 7,351 2 View
The use of a combination of active and passive measures to increase energy efficiency in building applications is possible. Passive strategies look into mechanisms in building design and...
01 January 1970 4,174 1 View
To determine the stability of nanofluids, many methods have been devised. The most fundamental strategy is sedimentation. Under an external force field, the sediment weight or volume of...
01 January 1970 8,671 1 View
Long-term nanofluid stability can be achieved by using functionalized nanoparticles. The technique is shown without the surfactant. The fact that no deposition layer forms on the heated surface is...
01 January 1970 7,691 5 View
Particles in a dispersion may stick together and form larger aggregates, which will eventually settle out due to gravity. If the particles are stable, they will not agglomerate at a significant...
01 January 1970 7,870 1 View
Increased surface area offers more surface area for heat transmission between particles and fluids. Particles moving in a Brownian motion have a high degree of dispersion stability. To achieve...
01 January 1970 5,811 9 View
Spectral absorbency analysis is another technique for measuring nanofluid stability. The absorbency intensity and nanoparticle concentration in fluid have a linear relationship in general. After...
01 January 1970 799 0 View
Eastmanetal was created to prevent nanoparticle aggregation. A one-step physical vapour condensation technique was used to generate Cu/ethylene glycol nanofluids. The one-step procedure entails...
01 January 1970 833 2 View
The technology of wind turbines is advancing. Larger onshore and offshore turbines, as well as floating turbines, need a dynamic study that takes into account thorough load modelling. The limit...
01 January 1970 1,122 0 View
Colloidal suspensions of ultra-fine metallic or non-metallic particles in a fluid are referred to as nanofluids. It is well known for its high thermal conductivity and improved heat transfer...
01 January 1970 4,065 2 View
Fermentation is the decomposition of organic materials by microorganisms in the absence of oxygen. Biogas, which is mostly composed of methane and carbon dioxide, is one of the fermentation...
01 January 1970 7,187 9 View
If we remove heat by cooling the condenser with water in air conditioner then it facilitates the phase changing(from vapor state to liquid state) by enhancing the development of London dispersion...
01 January 1970 8,629 6 View
Surfactants used in nanofluids are known as dispersants. Adding dispersants to two-phase systems improves the stability of nanofluids in a simple and cost-effective approach. Even little...
01 January 1970 3,484 0 View
