Mohsen Sabouri

6 Questions 16 Answers 0 Followers

Questions related from Mohsen Sabouri

Does anyone have an idea to fabricate a high temperature / high pressure reference electrode?

We need the reference electrode to carry out the electrochemical corrosion tests at max. 10 bar (H2S or/and CO2) and 20-150 °C.

08 July 2018 4,576 8 View

Could anyone provide me an approperiate procedure for cleaning the Gold-sputtered samples already used in SEM characterization?

The sample is a porous oxide layer on Aluminum produced by plasma electrolytic oxidation. Already, the sample employed for corrosion studies around 1000 h. Then, the corroded sample was...

23 April 2017 6,956 5 View

How is it possible to prepare non-conductive MWCNT?

We are going to prepare a ceramic layer (Al2O3) containing MWCNT without enhancing the conductivity of ceramic layer.

09 October 2016 6,349 4 View

Should the inductive, transient or diffusion behavior be taken into consideration in calculating the Rp using Modulus Bode Plots?

Consider the Attached pictures. This figures are the typical for INDUCTIVE, TRANSIENT (such as water absorption or changing the temperature) and DIFFUSION behavior during EIS experiments.

08 August 2016 8,601 1 View

What are the main diffrences between the Raman spectra of MWCNTs and carbon fibers?

The attached files are related to a ceramic-MWCNT composite layer. However, I am not sure that the G nd D peaks in the Raman spectra are the characteristic of MWCNT or carbon fibers? Also as the...

14 June 2016 3,528 6 View

Could anyone explain to me about physical meaning of the low frequency part of the attached EIS data?

This EIS data are obtained for an Aluminum alloy coated with a relatively thick and porous crystalline oxide layer. Also, a thin barrier phosphate layer may be formed on the Al surface just below...

14 April 2016 8,416 8 View