8 Questions 11 Answers 0 Followers
Questions related from Mohammaed Hammad
How composites can be modeled in ANSYS Using Solid185? If one try to model a fiber composite layer bonded to a concrete beam for example using solid185 element in ANSY, this layer shall be...
01 January 2016 9,040 9 View
I am modeling a reinforced concrete beam using ANSYS. From my repeated trials on nonlinear solution, I have noticed that changing the CONVERGENCE CRITERIA of solution will change the solution...
02 February 2015 10,171 16 View
How can I model bond-slip in ANSYS? In modeling RC beams with Solid65 and Link180 elements, how one can use Combin39 nonlinear spring to model the bond-slip (including bond slip test data curve)...
02 February 2015 9,061 4 View
I am modeling strengthening of RC beams by bonding a carbon fiber polymer strip to the beam soffit. I am using element solid185(layered) for modeling of fiber strip. My question is how to define...
02 February 2015 8,935 13 View
I am modeling the strengthening of reinforced concrete beams with FRP. I am using shell281 to model FRP. In the material modeling phase, I entered the nine needed properties for orthotropic...
12 December 2014 1,198 1 View
Dear All How we can determine the Failure Index of composite materials using ANSYS?
11 November 2014 9,999 2 View
I am modeling the behavior of RC beams strengthened with CFRPs using ANSYS. I was able to define the material properties of fiber laminates (Modulus of elasticity, Poisson ratio, and Shear...
11 November 2014 4,496 6 View
Dear Friends If it is given from the manufacturer that the elastic modulus in the fiber direction of a unidirectional CFRP material (E11) is X, How we can predict the elastic modulus of the...
11 November 2014 3,829 7 View
