Mahesh Kumar Lohano

6 Questions 22 Answers 0 Followers

Questions related from Mahesh Kumar Lohano

How can I design an immersed Coil or ground loop horizontal Heat Exchanger?

Inside tube has forced convection and outside is free convection, as fluid is stationary i.e. the fluid is in the tank. I want to calculate correction factor for this type of Heat Exchanger. How...

05 May 2014 6,406 1 View

How can I convert Wh/m^2 to W/m^2?

I want to calculate watt hour per square meter to watt per square meter.

05 May 2014 8,298 26 View

Which material is resistant to corrosion in saline water?

I want to design a heat exchanger which will operate in salty water. I want to know what material is corrosion resistant and has good thermal conductivity.

04 April 2014 9,714 17 View

How can I calculate the mass flow rate for a heat exchanger?

I want to extract heat from stationary saline hot water. Saline water is at a temperature of 60C. I want to heat up another fluid from 25 to 50C. LMTD is 14.06, di =16mm do=20mm, length of one...

04 April 2014 9,377 7 View

How can you solve the surface stability criteria equation for solar pond?

There are two boundary conditions for stability criteria of pond ds/dz(greater or equal) > 0.44(dT/dZ) ds/dz>1.19 dT/dz .. T is temperature, z is the depth , I only know temperature variation...

02 February 2014 2,845 0 View

How can I find HI and HO for heat exchanger?

In heat exchanger as we know R=(1/hiAi)+Rwall+(1/hoAo).

02 February 2014 9,922 11 View