8 Questions 1 Answers 0 Followers
Questions related from Maalti Puri
In my results i got very small value of Trelaxor =1C. While TDiffuse = 6C. Should we call these relaxors?
12 December 2014 1,617 3 View
In my results, the peak of loss tangent shifts toward lower temperature when frequency increased while the peak of dielectric constant shifts toward higher temperature with an increase in...
12 December 2014 707 5 View
In my materials i have got very low value of polarization in the range of Ps = 0.3-1.0 uC/cm2 and saturation magnetization Ms = 0.5 to 1.3 emu/gm. in which applications these materials can be used.
11 November 2014 2,210 3 View
In my materials i have got very low value of polarization in the range of Ps = 0.3-1.0 uC/cm2 and saturation magnetization Ms = 0.5 to 1.3 emu/gm. I here attach the PE loop and BH loops. In which...
11 November 2014 4,751 5 View
In my materials the dielectric constant has changed widely with respect to temperature. What will be the high temperature applications of these materials?
11 November 2014 8,615 2 View
In diffuse phase transition the value of Gamma approaches to 2. But in my case I got the value of gamma greater than 2. What can be reason behind it?
08 August 2014 7,508 1 View
I have got first peak at 100 C which is the transition temperature from Ferroelectric to paraelectric according to literature. But at higher temperature i got another peak of dielectric maxima....
08 August 2014 2,003 5 View
When I draw cole-cole plot of impedance for all temperatures then the center of the semicircles looks below real axis but for an individual temperature plot the semicircle shows the center above...
07 July 2014 2,909 4 View
