7 Questions 4 Answers 0 Followers
Questions related from Jay Kumar Shah
I believe its 10th such paper which just briefly mentioned how they used anodic current density at cathodic protection potential extracted from the polarization curves, to estimate the corrosion...
24 April 2024 1,410 3 View
I am currently developing a numerical model to observe the effect of bolt preload on ultrasonic signal propagation across a bolted interface. Since, bolt load and PZT patch modeling is only...
14 June 2023 905 3 View
Assuming that I am performing a bolt preload analysis in Model 1 (general standard) and then importing the last step results in Model 2 (dynamic explicit), what's the best way to fix the length of...
11 April 2023 5,010 0 View
We have two different piezoceramic patches made from the same material (first one is square in shape: 13 x 13 x 0.9; second one is rectangular: 18 x 9 x 1.76). All the dimensions are in mm. As...
02 March 2023 1,641 3 View
I want to model failure of a bolted plate in tension test using ABAQUS? How can I determine ductile (fracture strain, stress triaxiality and strain rate), shear damage (fracture strain, shear...
11 January 2019 7,210 3 View
I am trying to capture a damage based nonlinear phenomenon (generation of higher harmonics) in a system but instruments induced nonlinearity (specially from high voltage amplifier) is so dominant...
14 November 2018 5,398 6 View
We all know how difficult it is to unscrew a rusty bolt due to the expanded rusted volume. Possible explanation is: - rust is 6 times in volume of the material loss, hence more material is...
01 January 1970 8,594 1 View
