Foram Dave

6 Questions 6 Answers 0 Followers

Questions related from Foram Dave

For conformal coating on electronics, what will happen if there is a very thin coating of say only 1-5 micrometers?

1) For conformal coating on electronics, what will happen if there is a very thin coating of say only 1-5 micrometers with process point of view? 2) Will this solve the purpose of environmental...

30 March 2023 9,530 2 View

Could anyone please guide me through the procedure to experimentally analyse the weld depth in welded polypropylene samples?

I am doing research Laser Transmission Welding of Polymers. Could anyone please guide me through the procedure to experimentally analyse the weld depth in welded polypropylene samples? Do we need...

14 July 2021 1,514 3 View

How can we increase or change the decimal place (significant figures) of the terms in the uncoded regression equation generated in Minitab v19?

Design of experiment: How can we increase or change the decimal place of the terms in the regression equation generated in Minitab v19?

29 June 2021 3,258 4 View

For how long the PEEK samples (thickness 3-4 mm) be immersed in liquid nitrogen to carry out cryogenic fracture?

Purpose is to carry out SEM analysis of PEEK. For how long the PEEK samples (thickness 3-4 mm) be immersed in liquid nitrogen to carry out cryogenic fracture?

21 June 2021 693 4 View

In design of experiment, can we have CCD in RSM to be in 3 levels in a special mode called "face-centered" by changing alpha to value 1?

How can we use RSM when we have three levels? FCC with alpha = 1?

02 June 2021 7,180 5 View

Which crystal is formed in case of Polypropylene XRD for 2theta around 43 degrees?

For Polypropylene having carbon black composites, there are crystals formed for 2theta around 43 degrees during XRD analysis. I could not find literature explaining this peak.

24 May 2021 1,746 5 View