Eman Mahmoud

7 Questions 7 Answers 0 Followers

Questions related from Eman Mahmoud

What is the relative density of Fujian sand mixed with bentonite?

If I mix Fujian sand, with a specific gravity of 2.64, with varying percentages of bentonite (3% and 5%), where bentonite has a specific gravity of 2.57, I need to determine whether the relative...

27 January 2025 2,036 1 View

How can I simulate sand mixed with bentonite in PLAXIS 2D under dynamic conditions?

I am studying how mixing sand with bentonite can mitigate soil liquefaction. My question is, if I add a layer composed of sand mixed with bentonite in PLAXIS 2D, the cohesion factor of this layer...

24 November 2024 4,594 2 View

Depending on design codes, what is the recommended distance that must be found between the stone columns and the tunnel?

I need to put stone columns near an existing tunnel found in sand soil. Depending on design codes, what is the recommended distance that must be found between the stone columns and the tunnel?

28 March 2023 4,860 0 View

In plaxis 2d, what is the reason that makes stone columns not effective in liquefied soil?

I am using stone columns near a structure in liquified soil to mitigate liquefaction. But when I put the stone columns, they do not do anything. And there is no change in the excess pore water...

25 February 2023 8,957 1 View

How can I fix error " “Unable to write to file Jobname.ldhi. The ANTYPE,,REST command is unsuccessful.” in ANSYS APDL?

Hello, I am doing a static analysis using ANSYS APDL. I put the load in three load steps. When I try to restart the second load step from the first one, the program give me this error “Unable to...

05 March 2020 5,908 3 View

How I can restart simulation from the last converged substep in Ansys Apdl not in Ansys Workbench?

I am doing a nonlinear simulation for a wall made using solid 65 in Ansys APDL and I have a problem. I simulate a wall with two types of load.The first load is vertical load and the second load is...

29 February 2020 8,665 6 View

Depending on design codes, what is the recommended distance that must be found between the stone columns and the tunnel?

I need to put stone columns near an existing tunnel found in sandy soil. Depending on design codes, what is the recommended distance that must be found between the stone columns and the tunnel?

01 January 1970 9,383 0 View