Arun SRINIVAS Thangiah

5 Questions 5 Answers 0 Followers

Questions related from Arun SRINIVAS Thangiah

Will there be a significant reduction in ripple current of an induction motor drive when its PID controller is replaced by a fuzzy logic controller?

A closed loop speed control of a photo voltaic fed induction motor drive system was designed and controlled using a PID controller. The torque ripple which was around 4.5Nm was considerably...

14 June 2016 7,926 6 View

Is there any use in using a cuk converter over buck-boost converter as a charge controller in a solar fed speed control of induction motor?

Is it sufficient enough to control the cuk converter (charge controller) to control the speed of an induction motor fed by a solar supply or should i control both the cuk converter and the...

31 October 2015 8,184 5 View

Which cooling system is preferred for a 100V, 10KW BLDC electric car?

What should be the Energy density & AHr rating of (Lithium ion) battery for driving a 300kg car for a 30 km circuit?

09 March 2015 5,141 3 View

Type of motor prefered for electric car with a starting torque of 100Nm, max. power of 10Kw, voltage of 300V & weight 300Kg? Max car speed 120km/hr?

To design an electric car with following specifications which motor is preferred & why? machine specifications: i) voltage 300V ii) weigh of car - 300Kg. iii)Starting torque - 100Nm. iv) power...

09 March 2015 2,146 3 View

What is the difference between current harmonics and voltage harmonics? How should i measure each of them using a clamp on power meter?

How and where should i measure current harmonics and voltage harmonics using a clamp on power meter in a dSTATCOM ?

22 February 2015 3,238 6 View