Abid Shah

7 Questions 6 Answers 0 Followers

Questions related from Abid Shah

Solution of 2D convection diffusion heat equation using MATLAB ?

This is a polymer heating problem. Polymer enters at around 180C (x=0) in the barrel. Also barrel initial temperature is 180 (t=0). Some heat Is added along whole length of barrel q. We have to...

16 February 2021 4,206 1 View

Injection molding machine Simulation. Does anybody have access to this machine which i can use for simulation?

I have a keen interest to model an injection blow molding machine and then study it for energy efficiency and control it as well. Thanks

18 February 2020 6,696 2 View

Is there any researcher currently working on Stress control of soft/Flexible Robot manipulator?

I am interested to work on stress control of a flexible robot. Flexibility in terms of high DOFs than normal rigid/conventional robots... Thanks

02 November 2019 1,377 4 View

Crack growth in Fatigue test??

In Fatigue Crack growth study We should keep stress ratio always positive or we can keep it negative as well (stress ratio (R)= Min Stress/Max Stress). Note: Specimen is compact tension one,...

23 March 2017 4,156 3 View

Fatigue crack growth in mild steel?

Is Paris law valid for Low cycle fatigue? is there any limitation on number of cycle for Paris law study for crack growth?

20 March 2017 6,368 5 View

If i use impact testing machine for applying load for Fatigue crack growth

If i use impact testing machine for applying load for Fatigue crack growth in mild steel, then still i can use Paris Law for crack growth. As i think the load applied is still of constant...

14 March 2017 7,143 5 View

Stress intensity Factor range Delta K in Paris Law.

How to calculate it if i am using Chevron notch or straight through notch. Keeping stress ratio of 0. Stress range 0.5 Kn and material is Mild Steel.

11 March 2017 6,102 1 View