Intermetallic compounds form at fixed composition?
The main aim of the conference is to exchange the ideas and knowledge of the experts working on various scientific and technical aspects concerning extraction, processing, applications, properties...
06 July 2015 4,538 0 View
Need to find out the layer thickness and its composition; (Layer deposited on a powder particle whose average diameter in the range of 5microns).
31 December 2013 3,965 6 View
I am looking to determine Free Carbon and Combined Carbon content in Boron Carbide
08 September 2011 7,248 1 View
Chemical Etchants for Non- Oxide Ceramics
08 September 2011 8,160 1 View
- To determine Free Carbon and Combined Carbon content in Boron Carbide
08 September 2011 8,267 0 View
I have dataset which shows the length of power lines. I need to classify the lines based on the line length. Is there a rule to classify the High voltage (HV) and low voltage (LV) lines based on...
03 March 2021 4,116 4 View
I looking for ferro calcium production process
03 March 2021 1,755 4 View
Hello everyone. Given microstructure image belongs to a 12% ledeburitic cold work tool steel (annealed and tempered). The sample was etched with picral (100 mL ethanol and 4 g picric acid). I...
02 March 2021 4,119 3 View
Is There Any Feasible Method To Test The Efficiency Of Fluorescent Compounds Other Than UV Spectrometers ? Suggestions Would Be Appreciated !
02 March 2021 5,785 3 View
Which solution reveals the microstructure and features of nickel-based alloys?
02 March 2021 2,221 3 View
It is oftentimes said to be a distinctive metallographic trait that differentiates a fully austenitic and a fully felly ferritic steel without etching that might distinguish between two. Why...
02 March 2021 728 2 View
How do I do energy minimization in lammps with NVT ensemble ? I am using the following command and it does not seem to work. It stops at extremely high energy and gives me the error zero search...
01 March 2021 2,294 3 View
Hi there! I regularly receive suggestion about papers and authors that are totally out of my area. Does anybody know how I can fix this? Thank you!
01 March 2021 9,574 4 View
I am simulating helix antenna in hfss, right now, giving excitation with 50 ohms port. When I see the results of Z parameter (real). It shows lower than 50 ohms. Do not understand, if it can be...
27 February 2021 4,218 7 View
I am working on TiO2 composite material and the results of XRD have a lot of small/junk peaks and while I apply a smooth filter in Origin then the other characteristics peaks disappear so anyone...
26 February 2021 8,183 3 View