while drilling, measuring the temperature of rock, for every depth. in this condition what are all the thermal related properties can be measure and calculate
My paper:
Geothermal gradients in Iraqi Kurdistan deduced from bottom hole temperatures
will e published very soon by Egyptian Journal of Petroleum and may answer your question.
Regards
Many parameters could be measured and calculated, depending on the analysis that you'll be performing. For a coupled thermoplastic study, you'll need these parameters, plus some others :
Specific heat at constant volume, or constant pressure, the thermal conductivity, the modulus of thermal expansion and parameters that concern the thermomechanics of plasticity.
Kind regards
From a drilling, completion and production engineering application the thermal aspect is important to identify events that are affected by dramatic changes in temperature. For instance a change of mud in a deepwater well might cause partial or total collapse of the wellbore. Derivation of parameters such as fracture pressures, deformation parameters (YM, PR, Biot...) can be determined and use for applications such as fracturing, sanding and some others. I hope not helps.
