co-precepetation process, emulsion process or any other??
powder metallurgy
06 July 2017 2,578 0 View
peaks in XRD graph related question
31 December 2016 5,386 3 View
Currently i am working on polymer composite thin films, so i am little bit confused about the accurate specimen specification.
11 December 2016 1,652 8 View
Please introduce me the latest published articles on the structure and properties of metal nanocomposites?
26 July 2024 2,200 3 View
I have tried to saturate ferritic steel with hydrogen using the electrolytic method and H2SO4. However, the effect was very poor even after 3 days of "saturation". Can anybody help in choosing a...
24 July 2024 4,393 2 View
Thanks
22 July 2024 1,143 3 View
Suggest the best and shortest route for the chemical synthesis and and green synthesis of magnetite(Fe3O4) The chemical synthesis should contain the least dangerous chemicals along with full...
21 July 2024 2,476 2 View
Organic Synthesis. My student has been trying iodination of arenes (our goal is to iodinate p-phenylenediamine) following these literature procedures: 1. Synthesis 2004, No. 11, 1869-1873 using...
16 July 2024 6,630 1 View
I make polycrystalline diamond with tape casting followed by HPHT sintering. When i sintered the samples up till May, the sintering was good. When i sintered the samples in June and July at the...
16 July 2024 3,212 5 View
I am trying to load curcumin emulsion in 4% chitosan gel but i don not know how many mg powder is needed ?
10 July 2024 2,462 1 View
Regeneration Studies for the PVDF membrane and PVDF/CuO nanocomposite membrane were carried out by chemical cleaning.
07 July 2024 7,033 0 View
Even adding fragrance is not working
05 July 2024 741 2 View
I am doing qPCR but my HPRT1 Ct is not coming at the same point. I see a 2 cycle spread in Ct. I have checked my RNA quality A260/280, 230/280 values, did ethidium bromide gel. I used superscript...
04 July 2024 5,605 3 View
