Which Automobile Preferred in your Life 4 Wheel drive or salon ?

More Saad Kariem Shather's questions See All

What is your opinion about magnetic abrasive finishing (MAF) and is it suitable for manufacturing parts in medical applications?

Magnetic abrasive finishing (MAF) is one of advanced process which is used to machine and enhance the surface layer of parts .

10 November 2018 4,028 0 View

What is the value of the limited depth to which form errors, tapers, looping can be corrected by MAF process?

Which depth can be reached by magnetic abrasive finishing (MAF)?

10 November 2018 1,579 0 View

Are schools providing students with suffcient, well-trained guidance counselors?

Before university Are students prepared for college?being prepared for college means,at a minimum, having the English and math knowledge and skills to succeed in entry-level, credit-bearing college

04 May 2018 10,250 18 View

Do you recommended to use only the textbooks in Lecture ?

The textbooks in lecture.

04 May 2018 7,337 3 View

Are you alarmist about your country future?

many peoples were alarmist about their countries (decreases of water resource, natural resource, oil resource...)

03 April 2018 4,827 19 View

What have you learned from the process of doing your PhD?

03 April 2018 2,811 14 View

What are the limitations you have faced while writing PhD thesis?

The limitations in writing PhD thesis.

03 April 2018 2,869 23 View

How to convert mild steel into high carbon steel ?

Convert mild steel into high carbon steel

02 March 2018 4,044 2 View

What are the software’s which can be useful in manufacturing unit?

02 March 2018 9,943 7 View

What is the Difference between Production and Manufacturing?

Difference between Production and Manufacturing?

02 March 2018 1,444 7 View

What is the reason for current dropping in OER , LSV curve?

I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...

10 August 2024 3,629 1 View

What may be the reasons for failures of Tube toi Tube Sheet Joints in Boiler Drum ?

We have observed that tube to tube sheet joint leaked in our boiler and needs to overcome same by knowing the root cause.

08 August 2024 3,161 0 View

What is the cycling of matter through ecosystems and how energy drives the cycling of matter in photosynthesis and cellular respiration?

02 August 2024 9,518 2 View

What is the problem with these tissue culture plants?

All plants are green but some of these plants becomes yellow. I did not found any reason. Please help me to find out the real problem.

01 August 2024 589 4 View

Reason for discontinuities in my Band structure?

Hey All! I am wondering what might be wrong with my band structure. I did the calculations using VASP and plotted the results using Origin. Although I have tried changing various input...

25 July 2024 2,920 11 View

Can you visualize platelets using EVOS ?

Hi all, My lab has Thermo Scientific™ Invitrogen™ EVOS™ FL Auto 2 Imaging System, and I was wondering if I will be able to use it with whole blood, whilst focusing on platelets? The idea would...

24 July 2024 9,337 3 View

Is it fare for editors of reputed Journals to put on hold manuscripts more than six months without review updates, Are they harassing researchers?

It is being seen that Editors of some reputed Journals are putting on hold the manuscripts and not updating review states even passing more than six months from submission. Researchers are...

24 July 2024 8,596 2 View

Has anyone tried freeze flow samples in -80C freezer or liquid nitrogen before processing?

Our lab has some radioactive cell samples that need to be kept frozen for at least 30 days before flow analysis. For some reason, the samples stored in liquid nitrogen did not perform as well as...

15 July 2024 9,975 1 View

My Cyclic voltammetry curve doesn't show cathodic peak of Cu2+ to Cu+. how to solve this problem?

I performed CV of Cu-MOF in a buffer solution of pH 8, and we did not find any peak corresponding to Cu2+ to Cu+. What is the reason behind this? Please give your valuable suggestions.

08 July 2024 2,388 4 View

Hello, I’m growing three species of microalgae under heterotrophic and mixotrophic conditions. Both the two turned yellow?

What could be the reason for mixotrophs to be yellow too instead of green? Thank you

08 July 2024 594 2 View