What are different methods to measure work function of semiconductor?

If I want to know work function and electron affinity of Semiconductor. how do i measure?

07 August 2017 6,585 1 View

What is mean 'n-doping and p-doping" in polymer?

02 March 2016 1,091 4 View

Why do only polypyrrole films not show LPG sensing?

Why polypyrrole films not show LPG sensing?

31 December 2014 706 3 View

What are anisotropic electrical and optical properties of a semiconductor due to?

In some materials, properties such as band gap, thermal conductivity differ along different crystallographic axes. What are the basics?

01 March 2021 1,923 3 View

How the Ground Plane implantation is performed without damaging (and w/o varying the undoped nature) the top Si (8-10 nm) in FDSOI technology ?

It is a general practice to introduce Ground Plane in FDSOI devices under the BoX. The Ground Planes are introduced by Ion Implantation through Top Si layer and Buried Oxide. I wanted to know that...

24 February 2021 5,974 4 View

Can a semi-conductor material have different absorption coefficient?

Does the absorption coefficient of the semiconductor changes with the change in the structure of the semiconductor? If you have a thin film and nanowire of the same semiconductor, will the...

23 February 2021 9,799 4 View

How can we determine the band gap of a composite material that is made up of a composition of direct and indirect band gap semiconductor materials?

I have a direct band gap material and an indirect band gap material. If I made a composite of both through physical mixing. Then how can I determine the band gap of such a material as the Tauc...

17 February 2021 8,104 4 View

How to avoid polypyrrole deposit on counter electrode?

Hi all, Currently, I electrodeposited polypyrrole on carbon electrode but I got some problem when polypyrrole also deposited on the surface of the counter electrode. The concentration of pyrrole...

05 February 2021 2,103 3 View

Any resist stripper which can remove thick metal based polymer residue and which is compatible with doped silicon ?

I am looking some resist strippers which can easily remove metal based polymer residue after post dry etch process. I have some candidates below but not sure if they are compatible with doped...

21 January 2021 3,008 3 View

What is the best way to calculate electrical conductivity of semiconductors and the same system with a layer of oxide using Quantum Espresso?

I have tried BoltzTrap, and EPW but I'm not sure whether Boltzmann Transport Equation is a right approach for a complex system (semi cond. + an Oxide layer or even the semiconductor itself). Also...

11 January 2021 4,597 4 View

How to calculate the band potential of a semiconductor material using energy band gap?

I am looking for methods to calculate the band potential of ZnFe2O4 and Fe2O3.

05 January 2021 6,416 2 View

Application for Ph.D. in Inorganic Chemistry?

I hope to have the opportunity to continue toI hope to have the opportunity to continue to do more in-depth research, do more in-depth research. My main field is to use semiconductor metal oxides...

04 January 2021 1,148 2 View

What is the physical significance of series resistance of a Schottky diode?

Is series resistance a parasitic parameter of the resistance of the semiconductor in a metal-semiconductor contact? Device physics

04 January 2021 5,544 3 View