What is the oxidation mechanism for fatty acids using cyclic voltammetry?

More Neghmouche Nacer Salah's questions See All

MAGeCK Plotting Error: Logarithmic Axis Must Have Positive Limits?

I have been running a MAGeCK test command on the terminal for a CRISPR screen to rank sgRNAs and genes based on the read count tables. However, I get only the plot of the top-ranked genes...

28 July 2024 9,811 1 View

Getting small dark current when simulating the Photovoltaic device Using the SCAPS-1D?

When I simulate the solar cell or self-power photodetector in SCAPS-1D, I optimize all parameters, Once I check the dark current at 0 voltage, the current is high in a range of (e-16-e-25), as...

06 July 2024 1,782 3 View

How to calculate Capacity retention for Lithium metal battery?

I have prepared half cell. Lithium is considered as anode in the system. Whereas, I would like to know what is actually capacity retention? How it can be calculated mathematically? On what factors...

02 June 2024 4,135 0 View

Is there a free trial of the SILVACO TCAD ?

I wan to simulate the 2D Photodetector

22 April 2024 8,756 0 View

Is there a company known that can design an electrode shadow mask for photodetector ?

I want to design electrode shadow masks for photodetectors .The shadow mask can be made from uncontaminated materials. We do not have lithography fabrication at my university, so i want to design...

12 April 2024 2,312 3 View

What is the reason that a Li-ion coin cell is not showing efficiency on neware battery testing system?

I have been working on electrospun membrane for Lithium Ion coin cells. I have tried to control different parameters, such as, thickness, electrolyte amount and many other parameters. I am facing...

26 March 2024 2,786 0 View

Is this journal legitimate (Tobacco Regulatory Science ISSN: 2333-9748 ) ?

I'm considering submitting a manuscript to this journal (Tobacco Regulatory Science ISSN: 2333-9748 ) Has anyone published in this journal before? I am looking to confirm that this journal is...

05 March 2024 4,144 1 View

What is the agricultural area using center-pivot irrigation in Egypt and how many center-pivot irrigation devices are there?

area using center-pivot irrigation in Egypt Number of center-pivot irrigation devices

16 February 2024 1,376 0 View

Is there absolute truth in marketing?

From the perspective of epistemology, is there absolute truth in marketing?

02 February 2024 9,182 6 View

Journal of Materials and Manufacturing (JMM)?

New Journal of Materials and Manufacturing (JMM): JMM is published two times per year in july and December: https://jmatman.org/index.php/journal

14 January 2024 7,729 0 View

Could dyes amplify the spectrum of light to a specific wavelength?

I am interested to know the behavior of dyes toward light. Specifically, Blue dyes re-emit the spectrum, especially from the green zone (known as principal in LED lamps, and blue dyes are known...

05 August 2024 3,290 1 View

How to determine the charge passing during a cyclic voltammetry?

Dear All, here is my question: if I have a 15-scans cyclic voltammetry performed with PalmSens, how can I obtain the charge passed during the process? Hopefully avoiding integrations,...

29 July 2024 3,733 5 View

Why semicircle of nyquist plot is not complete?

While I am doing HER, I noticed that nyquist plots of Electrochemical Impedance Spectroscopy (EIS) is not complete. Will it affect for the Linear Sweep Voltametry (LSV) data? However, I can found...

26 July 2024 7,542 4 View

What binder would be the best choice to modify glassy carbon electrode with a 2D Material like Graphene or MXene?

I am trying to drop cast 2D Materials on Glassy Carbon Electrode for Cyclic voltametry and EIS purpose. What would be best binders to use?

23 July 2024 5,776 2 View

Can you please help me with a cyclic voltammetry?

Hi, I was wondering if you could help. When I take CV in GC electrode with the solution of InCl3 0.01M + citric acid 0.01M + NaCl 0.1M, I get such a graph, how can I correct it so that the...

11 July 2024 5,024 1 View

My Cyclic voltammetry curve doesn't show cathodic peak of Cu2+ to Cu+. how to solve this problem?

I performed CV of Cu-MOF in a buffer solution of pH 8, and we did not find any peak corresponding to Cu2+ to Cu+. What is the reason behind this? Please give your valuable suggestions.

08 July 2024 2,388 4 View

How to converge PEMFC in Ansys Fluent?

I am simulating 1 cell of PEM with an area of 50 cm². The mesh has an orthogonality of 0.2 for the channels and bipoar plates (polyhedra) and a quality of 1 for the active zones (hexagonal). The...

26 June 2024 2,358 0 View

How to identify if a material is behaving like an anode or a cathode?

when we perform a cyclic voltammetry study, how can we conclude if a particular material is behaving like an anode or cathode with the help of that CV plot?

20 June 2024 1,453 3 View

What is the difference between absorption and adsorption?

30 May 2024 4,447 27 View

Advanced Oxidation process ?

Advanced oxidation process is usually produces carbon dioxide , is it harmful to run such setup in the lab?

17 May 2024 6,550 3 View

Yurii V Geletii

Electrochemistry is not the tool to study the oxidation mechanism for fatty acids.

Nurul Utami

There is an old publication about the subject you asked, but unfortunately it is in Japanese language :-) . https://www.jstage.jst.go.jp/article/bunsekikagaku1952/44/1/44_1_29/_article

Neghmouche Nacer Salah

thank you