What is the excessive condition for acid treatment of carbon.

More Basheer AlShammari's questions See All

What are the manufactures of polymer containing carbon nano tubes ?

What is the best industrial method for manufacturing polymers containing carbon nano-tubes composites materials . if there is any existing companies dealing with such composites , please let me...

31 December 2018 9,924 3 View

What is the best way to deposit graphene sheets on the Cu sheet?

I used modified hummer method for preparing graphene from graphite, When i left the mixture 24h after refluxing , I found a very small bubble in the top of it. Can anyone please help . Also , why...

03 April 2016 6,946 6 View

Is there any difference between GNP and graphene ?

if there is a table shows their properties? thanks in advance

11 December 2014 3,890 4 View

Why 120 c is usually used for the acid treatment of CNTs?

Acid is a mix from sulfric and nitric.

10 November 2014 7,424 3 View

Why was the melting temperature of PET in the second heating run (DSC) lower than that obtained from the first run?

Any idea please?

10 November 2014 782 5 View

What is the tensile modulus of CNTs and GNP?

Is 1 TP a theoretical or experimental value? Also, how can I measure this modulus? What is the effective modulus of filler in the composites? Thanks in advance.

10 November 2014 8,671 8 View

What do dispersion and distribution of the filler into polymer matrix mean?

Or why are good dispersion and bad distribution of filler good for electrical conductivity? Thanks in advance

10 November 2014 5,524 9 View

What is the difference between quenching my PET or cooling it slowly?

Will the crystal size be bigger or smaller?

10 November 2014 3,213 5 View

Why do thermoplastic polymer crystallize at all ?

Any help please

10 November 2014 1,075 1 View

Why two heating runs usually do in DSC , what is the difference ?

Any help please , Also, Why thermal history can removed by hold the polymer for 5 min ?

10 November 2014 8,429 5 View

What is the reason for current dropping in OER , LSV curve?

I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...

10 August 2024 3,629 1 View

Adhesion strength of coating?

How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...

10 August 2024 942 3 View

Do interactions between biosphere, carbon cycle, & water cycle impact global warming & interaction between atmosphere & hydrosphere?

How do interactions between the biosphere, the carbon cycle, and the water cycle impact global warming and interaction between the atmosphere and the hydrosphere?

09 August 2024 3,291 2 View

How are iso-frequency contours plotted?

Let's say we have a standard, regular hexagonal honeycomb with a 3-arm primitive unit cell (something like the figure attached; the figure is only representative and not drawn to scale). The...

07 August 2024 1,937 1 View

Separation of organic acids-HPLC?

Hello What should be done to separate and identify organic acids in HPC when their RetTime is the same?Like oxalic acid with Propanoic Acid.or acids that have a very close RetTime.

07 August 2024 8,782 3 View

Who of all of you will help TPEOM to re-originate the Earths atmosphere to it original 5 atmospheric elements/gases?

Global ‘Weather’ has stopped, as ‘aqua thermionic instituted by the ‘Global thermo atmospherics has instituted global thermodynamics of 120º C + and thus all waters are, or have boiled into a...

06 August 2024 8,716 0 View

Determining the worth of a point improvement in Hamilton Depression Scale?

Dear readers, Thanks for your attention. I am wondering about the health economic problem of quantifying the value of interventions which a) prevent, b) improve symptom profile and c) ultimately...

05 August 2024 3,246 1 View

How can I define dispersion for salt in CMG or Eclipse?

How can I define dispersion for salt in Eclipse in a low salinity water flooding code? how can I active interactions between tracer and polymer in Eclipse? Please let me know if you have any idea.

05 August 2024 1,218 1 View

London dispersion in CCl4 vs the dipole-dipoles force strength in CHCl3?

How do you tie-break and rank these two in their strength?

03 August 2024 4,471 1 View

Conjugation of PEG-Amine to an Amino Acid Using EDC?

I am attempting to conjugate PEG to an amino acid at the C-terminus, for the purposes of producing nanoparticles. I have been told that PEG modified with amine groups can be used for this purpose,...

31 July 2024 2,033 1 View