What is laser damage threshold of CVD diamond at 532 nm for nanosecond pulses for spot diameters > 1 mm ? Please indicate data with reference.
I was able to find in Internet data only for 10.6 micron CO2 laser.
Aleksandr A. Tarasov This is a paper I found which it uses 532 nm for nanosecond pulses of 50 ns and diamond plates of 25 nm diameter and 0.5 mm of thickness.
Article Laser damage testing of CVD-grown diamond windows
Dear Alexander, please check the following paper
10.1109/IVNC.2017.8051651
If you are unable to access the paper on the publishers homepage, you may find a downloadable file on my RG-account.
best regards, Dirk
Dear
I think this link is useful for you
https://www.spiedigitallibrary.org/conference-proceedings-of-spie/0969/0000/Laser-Damage-Of-Diamond-Film-Windows/10.1117/12.948169.short?SSO=1
I am very grateful to all researchers for their response. Many thanks !
I used during a long time the program SNLO (Qmix) using computers with Windows XP, 7 and 10. First time this program worked also under Windows 11. Now (probably after the last system update) Qmix...
09 July 2024 7,243 1 View
I am a member of the Department of Analytical Chemistry at Voronezh State University, and the topic of my research is the study of CO2 sorption on MOFs using quantum chemistry methods. Now we...
15 March 2024 8,056 0 View
Good afternoon! Can anyone tell me where I can find a map of a particular country (or a complete world map) bordering the Arctic zone, and where the solid minerals located on the Arctic shelf will...
03 March 2024 6,200 1 View
There is a sealing with a rubber core and a polymer shell. The sealing is positioned into a groove and then is subjected to pressure from a one side. I've built a 2D model with plain strain...
26 February 2024 4,673 9 View
I want to start using artificial neural networks to generalize results on adsorption, but I'm stumbling across paid programs.
19 February 2024 9,881 0 View
Advise a method for the addition of proline to a sorbent, the sorbent is functionalised with a COOH group
04 February 2024 3,354 0 View
Can anyone help, is it possible to functionalise SWCNTs-COOH with proline(aqueous solution)?
31 January 2024 1,914 1 View
I'm currently working on my leaving qualification paper and its main purpose is to develop my own algorithm of finding similarities in musical compositions but firstly i need to learn more about...
04 December 2023 8,086 1 View
So far I've got very mixed opinions on the matter. I cannot use liquid nitrogen or beads for homoginzation, thereby, would it be ok to use vortex to homogenize tissue? I duobt that it would damage...
03 December 2023 1,024 1 View
Could anyone help me to realize how to get unnormalized EDS results in Genesis?
13 August 2023 8,506 2 View
i am unable to interpret why its increases in start as shown in figure
11 August 2024 2,179 1 View
I want to know more about diamond ore deposits in world.
11 August 2024 2,167 1 View
How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...
10 August 2024 942 3 View
I am using Rhodamine6G as gain medium and silver nanoparticles as scatterers on a microscope slide and laser input 532 nm comes from above.
09 August 2024 9,894 2 View
07 August 2024 7,413 0 View
For example, I perform passivation process before electropolymerization of Py for adhesion to titanium surface. Is a similar or different procedure required for ITO? If necessary, I would be glad...
06 August 2024 3,176 0 View
I am interested to know the behavior of dyes toward light. Specifically, Blue dyes re-emit the spectrum, especially from the green zone (known as principal in LED lamps, and blue dyes are known...
05 August 2024 3,290 1 View
Details of the Analysis. Static Analysis Composite Layup Continuum Shell Elements FRP Material (Elastic and Hashin Damage)
03 August 2024 8,538 4 View
I want to know more about diamond ore deposits in Iran.
02 August 2024 7,399 0 View
I am using a Bruker 600M solid-state NMR spectrometer with a Micro 2.5 microimaging system. The test sample is a tube of 1M LiCl aqueous solution, and the nucleus detected is 1H. I am trying to...
01 August 2024 9,227 1 View