In a synthesis processes , we need to use A passivated FEP T -reactor?, please , can any body explain about it.
thank-you very much.
A typical reforming section in a large-scale Haber-Bosch process (Figure 1) comprises two reactors. A mixture of methane (CH4) and steam (H2O) is fed into a primary reformer to produce syngas via...
01 August 2024 7,051 5 View
Thanks
22 July 2024 1,143 3 View
Suggest the best and shortest route for the chemical synthesis and and green synthesis of magnetite(Fe3O4) The chemical synthesis should contain the least dangerous chemicals along with full...
21 July 2024 2,476 2 View
How can I define Planetary motion in ABAQUS CAE, how define motion of three rollers around a central axis and passive rotation about their own axis?
16 July 2024 4,145 1 View
Organic Synthesis. My student has been trying iodination of arenes (our goal is to iodinate p-phenylenediamine) following these literature procedures: 1. Synthesis 2004, No. 11, 1869-1873 using...
16 July 2024 6,630 1 View
I make polycrystalline diamond with tape casting followed by HPHT sintering. When i sintered the samples up till May, the sintering was good. When i sintered the samples in June and July at the...
16 July 2024 3,212 5 View
I am doing qPCR but my HPRT1 Ct is not coming at the same point. I see a 2 cycle spread in Ct. I have checked my RNA quality A260/280, 230/280 values, did ethidium bromide gel. I used superscript...
04 July 2024 5,605 3 View
I need a PET + Solvent mixture to feed it to a fixed bed reactor for steam reforming.
30 June 2024 2,122 2 View
I want to isolate RNA from bacillus subtilis using the QuickRNA Fungal Bacterial Miniprep Kit from Zymo Research and further reverse transcriptase to cDNA using the ReverTra Ace qPCR RT Master Mix...
27 June 2024 2,951 5 View
Suppose, a new metal nanoparticle synthesis process is carried out in my lab. And then, by which physical or lab tests confirm its nanoparticle confirmation ?
26 June 2024 6,940 2 View