04 April 2015 11 10K Report

There are many scientific journals, but I want to know what are the approved scientific journals in this specialty?

More Nada Al-Eidan's questions See All
How can I sterilize a silver nitrate solution from bacteria in order to detect bacteria resistant to silver nitrates?

It is known that silver nitrate solution is used as a detector, which detects the type of bacteria resistant to this solution.

15 October 2017 5,837 2 View

How can I sterilize a silver nitrate solution from bacteria in order to detect bacteria resistant to silver nitrates?

It is known that silver nitrate solution is used as a detector, which detects the type of bacteria resistant to this solution.

09 October 2017 9,617 2 View

Does anyone have any information about heat pipe solar collector works with nanofluid?

Currently, I am working on the effect of different type of nanofluid on the performance of evacuated tube heat pipe solar collector.  

22 March 2017 1,633 3 View

Can I use a metal as a reference electrode, is there any research to prove that I can?

I am looking to use Cu(s) as a reference and working electrode.

11 December 2015 2,096 13 View

Is the presence of acids in the lab affect of the Potentiostate or Galvanostate devices?

These devices are used to measure the corrosion rate which is very sensitive, does the presence of acids in the laboratory affect the results of tests or not?

04 May 2015 9,417 2 View

What are the manufacture methods of alloys that used to study the corrosion?

There are many methods adopted for the manufacture of alloys consisting of more than one metal in order to protect the metal from corrosion.

21 April 2015 9,092 8 View

What are the most dangerous types of corrosion and does the dangerous vary depending on the type of metal?

There are many types of corrosion as contained in the picture, what is the most dangerous type?

17 April 2015 8,707 10 View

What are the most powerful scientific journals interested in electrical chemistry and especially in corrosion?

There are many scientific journals, but I want to know what are the approved scientific journals in this specialty?

05 April 2015 7,297 10 View

Can distilled water be used instead of deionized water for immunohistochemistry?

Respected all, I have a protocol for TNF-alpha that calls for deionized water. Would distilled water be a good alternative? Thanks!

03 April 2015 7,035 9 View

How can one interpret different types of molecular interaction in binary liquid mixtures depending on the sign of viscosity deviation?

What we conclude if we have positive or negative viscosity deviation? For example : attraction, repulsion, dispersive forces, strong or weak interaction, etc. 

01 February 2015 4,831 6 View

Similar questions and discussions
What is the right voltage sweep direction for characterization of HER kinetics?

In general, when performing a Tafel analysis for corrosion resistance measurements, a line voltage scan is performed from say -250 to +250 mV vs. OCV at low scan speed around 0.125 mV/s. However,...

25 July 2024 7,982 3 View

What binder would be the best choice to modify glassy carbon electrode with a 2D Material like Graphene or MXene?

I am trying to drop cast 2D Materials on Glassy Carbon Electrode for Cyclic voltametry and EIS purpose. What would be best binders to use?

23 July 2024 5,776 2 View

Is there a good macro photography kit for on-site metallurgical investigation?

I am looking to purchase a photography kit for onsite metallurgical investigations, such as capturing photos of worn areas, hot tears, cold tears etc. Could anyone suggest me a good...

22 July 2024 3,490 2 View

Collaboration on corrosion ?

Would anyone be interested in collaborating on corrosion?

07 July 2024 4,726 2 View

How to calculate corrosion rate from potentiodynamic polarization test data for dissimilar welds?

we need surface area, corrosion current, equivalent weight and density of the metal involved for corrosion rate calculation in mm/year (lets say). For dissimilar metal welds, how can we measure...

30 June 2024 5,943 2 View

How can I understand the sensitivity of my corrosion system to obtain reliable results?

I am working with a polysaccharide grafted on chitosan and my corrosive medium is 3.5 wt% NaCl. My surface is carbon steel. I am struggling to obtain a proper trend for my corrosion results. I am...

29 June 2024 5,592 1 View

How to converge PEMFC in Ansys Fluent?

I am simulating 1 cell of PEM with an area of 50 cm². The mesh has an orthogonality of 0.2 for the channels and bipoar plates (polyhedra) and a quality of 1 for the active zones (hexagonal). The...

26 June 2024 2,358 0 View

Can anyone please explain what are the precautions that we need to take during corrosion measurement with EIS?

Corrosion studies by electrochemical measurement.

19 June 2024 5,274 3 View

What is the difference between absorption and adsorption?

What is the difference between absorption and adsorption?

30 May 2024 4,447 27 View

What's the Next Generation of Aerospace Materials?

In recent years, the aerospace industry has greatly benefited from advanced materials like fiber-reinforced polymers (FRPs). These materials, made by combining a polymer matrix with fibers like...

25 May 2024 1,418 2 View

Our partners will collect data and use cookies for ad personalization and measurement. Learn how we and our ad partner Google, collect and use data. Agree & close