Dear Dr Saad

These parameters are important in the design of bearing pads. In other applications of pads the compression loading is essential and therefore, the compression test should be achieved and the best correlation may be obtained depending upon the objective parameter. Best regards.

PU generally used

Nanocomposite - reinforcement kevlar, nanoparticles, can be used.

Dear Dr.Muhsin:

Greeting , I think the using of nanomaterials in manufacturing the bearing pads is to enhance of performance of bearing and increase wear resistance ,stable value of coefficient of friction (m) under various operating and environmental conditions like applied brake pressure, increase pad temperature,and humidity .

best regard,Saad Shather

Dear Dr Saad

These parameters are important in the design of bearing pads. In other applications of pads the compression loading is essential and therefore, the compression test should be achieved and the best correlation may be obtained depending upon the objective parameter. Best regards.

Thanks Dr Saad for these information. Best regards

Dear Dr Muhannd

The research is still in progress. I will send you the information and some papers related to this work. Best regards

Thanks Dr Saad for theses valuable inormation

Thanks Dr Bhaskar

Thanks Dr Sajda for the recommendation