What are the applications of nanofluid in lubrication industries ?

More Ahmed Kadhim Hussein's questions See All

I have get this error when i calculated the geometrical optimization for prco3, it takes 12 hours until gives this message in the outputfile?

Fatal error in MPI_Allreduce: Other MPI error, error stack: MPI_Allreduce(1628)......: MPI_Allreduce(sbuf=000002459254A180, rbuf=000002459F86A140, count=4851, MPI_DOUBLE_COMPLEX, MPI_SUM,...

09 August 2024 7,615 1 View

Why Do TDS and EC Increase with Larger Wastewater Volumes, While BOD and COD Decrease?

I have carried out MFC experiments on three different volumes, 50, 500 and 1000 mL of wastewater. Results after MFC treatment shows that TDS and EC are more in larger volumes of water i.e. TDS and...

09 August 2024 9,621 0 View

How to set the environment variable for incorporating the GD3 dispersion in G16 for performing calculations using the OPBE functional?

I have incorporated the dispersion effect for the OPBE functional by specifying the S6, SR6 and S8 parameters for GD3 in Gaussian G09 package. For this purpose, I have defined the environment...

05 August 2024 1,494 2 View

How Social Media Affects Your Mental Health ?

How Social Media Affects Your Mental Health

04 August 2024 6,961 3 View

Do You Know Untreated TMJ Affects Your Brain And Entire Body?

04 August 2024 6,282 1 View

How prion can cause disease?

how is prion can cause disease

01 August 2024 250 1 View

Has anyone used Jump 2 before?

Jump 2 is the 1st app scientifically developed to measure your jump height.

31 July 2024 8,194 0 View

Help on understanding the implementation of Mori Tanaka method on MATLAB?

I am new to Micromechanics and having similar problem with understanding the implementation of the formula's. I would appreciate if anyone can guide me on how to go about getting a scalar value...

30 July 2024 969 0 View

Why do some of my Raman spectra show no signal at lower Raman shifts?

I'm using a InVia Renishaw Raman microscope system (785nm wavelength, 600l/mm grating density) to acquire Raman images on human brain samples, at 50um resolution. The samples are placed on MgF2...

30 July 2024 8,771 3 View

I need a reliable source or an example supported by excel sheet to understand Fuzzy Vikor?

27 July 2024 5,916 1 View

How to account for semi-opaque obstruction in visual field "anchored" to bottom?

I have seen two kinds of explanations given for the phenomenon that I try to draw in the attached png document. One explanation says that an air bubble creates the experience of a solid black...

16 June 2024 6,493 1 View

Chemicals are used in cutting fluid ?

which chemicals are used in biological stable water-based emulsified cutting fluid as base oil, alkaline component, lubricant, anticorrosive agent, surfactant, coupling agent, water quality...

11 January 2024 5,833 4 View

How I can say h-BN is an eco-freindly material.........with what properties ?

I am using h-BN (Boron nitride) as a lubricant material. How can I say its an eco-friendly material and by what property. How do I justify the material itself is eco-friendly. Any experimental...

16 November 2023 7,332 0 View

Why Ammonium para tungstate is being used for the preparation of graphite based lubricant?

Various graphite-based lubricants are being used for the drawing of W or Mo wires. Out of those lubricants, I found APT as a constituent in one of the lubricants.

11 October 2023 2,981 0 View

What is the standard scientific procedure adopted for FESEM analysis?.Is there ASTM or ISO standard available for FESEM analysis?

I want to know the ASTM/ ISO Standard for FESEM analysis of Fullers Earth powder as an adsorbent to treat the refined lubricating oil.

01 September 2023 1,102 0 View

How can a steel ball form reciprocating motion in the cage under lubrication conditions?

What additives or lubricants are required for the operation status of the steel ball in the fixed section of the CVJ of the car, or at what friction coefficient can the steel ball not move at a...

05 August 2023 2,934 1 View

How to calculate sliding friction coefficient using elasto-hydrodynamic lubrication?

I would like to simulate the heat generation in helical gears. I need to calculate friction coefficient, contact stress and sliding velocity. How to calculate friction coefficient?

01 June 2023 8,524 0 View

How can I remove the black spots from the Microstructure of Magnesium samples?

I have fabricated magnesium samples by powder metallurgy route. I have used emery papers for grinding till 4000 grits without using water, and for final polishing I have used diamond paste...

28 April 2023 1,797 4 View

I want to prepare magnesium reinforced with SiO2 composites using powder metallurgy. What types of lubrication is suitable during compaction process?

11 March 2023 234 1 View

What is Bioburden test limit for Class-1 lubricant?

I was performing bioburden as per regulatory requirements, Can i go through USP-1111 Annexure-3 guidelines?

12 February 2023 1,036 0 View

Ahmed Kadhim Hussein

explain your idea

Nowduru Ravikiran

In the lubrication industries nanofluids have a wide range of applications. The target application can be as simple as a highly efficient water based coolant or using nanomaterials in fluids as additives to improve the properties like wear resistance, friction resistance, corrosion resistance and many more. Nanofluids can also be used as additives in greases. The number of ideas of using nanofluids in lubrication industry are endless.