I am looking to do experiments with NFC/RFID chips and readers. I would like to collect signal strength, phase, angle of arrival etc. of the chip in close proximity to the reader, rather than just an indication of whether the chip is present or not. Ideally looking for reasonably priced commercial hardware.
ChameleonMini (ChameleonMini (Chameleon) The original German University in the study of RFID security designed for a multi-band multi-type RFID simulation hardware, the design itself supports ISO14443 and ISO15693 standard protocol, the simplest direct use is to get the Dump file itself into To the chameleon can be simulated operation, and can be between the card and the card data switch and restore operation, can be understood as a universal UID white card / powerful monitor card.
You can find more data in this web page : https://github.com/emsec/ChameleonMini/wiki
Also you can use PN532 module from Seeedstudio. You can find more information about this module in this web site : https://github.com/Seeed-Studio/PN532
- Badges
- Science topic